Aruba 103H : Controller-managed, wall-mount 802.11n

Danh mục: Aruba, HP, Thiết bị mạng CISCO - HP - ATi, Wifi, Controller Aruba

The AP-103H installs in minutes and easily mounts to an electrical or data wall box. It uses the existing structured cabling system to provide secure wired and Wi-Fi network access in dormitories, classrooms, hotels, medical clinics and multitenant environments.

The compact and cost-effective AP-103H delivers wireless data rates up to 300 Mbps per radio employing 802.11n technology with two spatial MIMO streams. This 2×2:2 AP features dedicated 2.4-GHz and 5-GHz radios and integrated omni-directional antennas.

For wired connectivity, the AP-103H provides two secure downlink switch ports, a passive pass-through RJ-45 port, and a 10/100/1000BASE-T uplink port. It can be powered using an 802.3af power-over-Ethernet (PoE) source on the uplink network port or a 12-volt DC power supply.

Compare

Mô tả
Đánh giá (0)

Datasheet :

http://www.arubanetworks.com/assets/ds/DS_AP103H.pdf

ADVANCED FEATURES

Best-in-class RF management
- All Aruba APs include Adaptive Radio Management technology, which is essential to creating the most reliable, high-performance WLANs. ARM manages the 2.4-GHz and 5-GHz radio bands to optimize Wi-Fi client performance and ensures that APs stay clear of RF interference.
Spectrum analysis
- Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4 GHz and 5 GHz radio bands to identify sources of RF interference.
Security
- SecureJack-capable for secure tunneling of wired Ethernet traffic.

OPERATING MODES
Mobility Controller-managed AP Remote AP (RAP) for branch deployments Air monitor (AM) for wireless IDS, rogue detection and containment Spectrum analyzer, dedicated or hybrid Secure enterprise mesh

WIRELESS RADIO SPECIFICATIONS

AP type: Indoor, dual radio, 5-GHz and 2.4-GHz 802.11n 2×2:2
Software-configurable dual radio supports 5-GHz (Radio 0) and 2.4-GHz (Radio 1)
2×2 MIMO with two spatial streams and up to 300 Mbps wireless data rate
Support for up to 32 associated client devices, and up to eight BSSIDs per radio
Supported frequency bands (country-specific restrictions apply):
- 2.4000 GHz to 2.4835 GHz
- 5.150 to 5.250 GHz
- 5.250 to 5.350 GHz
- 5.470 to 5.725 GHz
- 5.725 to 5.850 GHz
Available channels: Dependent on configured regulatory domain
Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum (DSSS)
- 802.11a/g/n: Orthogonal frequency-division multiplexing (OFDM)
Supported modulation types:
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
Transmit power: Configurable in increments of 0.5 dBm
Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):
- 2.4-GHz band: +21 dBm (18 dBm per chain)
- 5-GHz band: +21 dBm (18 dBm per chain)
Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks
Maximum ratio combining (MRC) for improved receiver performance
Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
Short guard interval for 20-MHz and 40-MHz channels
Space-time block coding (STBC) for increased range and improved reception
Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
Supported data rates (Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: 6.5 to 300 (MCS0 to MCS15)
802.11n high-throughput (HT) support: HT 20/40
802.11n packet aggregation: A-MPDU, A-MSDU

ENCRYPTED THROUGHPUT
Max IPsec encrypted wired throughput = 10Mbps

ANTENNAS
Two integrated dual-band omni-directional antennas for 2×2 MIMO with maximum antenna gain of 3.6 dBi in 2.4 GHz and 3.3 dBi in 5 GHz. Antennas are optimized for vertical wall mounted orientation of the AP.

OTHER INTERFACES

E0: 10/100/1000BASE-T Ethernet network interface (RJ-45)
- Auto-sensing link speed and MDI/MDX
- 802.3az Energy Efficient Ethernet (EEE)
- PoE-PD: 48 Vdc (nominal) 802.3af PoE
E1-E2: 2x 10/100BASE-T Ethernet network interfaces (RJ-45)
- Auto-sensing link speed and MDI/MDX
PT: Passive RJ-45 pass-through port
DC power interface, accepts 1.7/4.0-mm center-positive circular plug with 9.5-mm length
Visual indicator (single tricolor LED): power/system status
Dual-function push-button: Factory reset during device power up and LED on/off control during normal operation
Serial console interface (proprietary; optional adapter cable available)
Kensington security slot

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Aruba 103H : Controller-managed, wall-mount 802.11n”

Website này sử dụng Akismet để hạn chế spam. Tìm hiểu bình luận của bạn được duyệt như thế nào.

Categories

Aruba 103H : Controller-managed, wall-mount 802.11n

Đánh giá

Related Products