Cisco Catalyst 3650 Series Switches
Cisco Catalyst 3650 Series Switches are the next generation of enterprise-class, stackable access-layer switches that provide full wired and wireless convergence on a single platform. The Cisco Catalyst 3650 enables uniform wired-wireless policy enforcement, application visibility, flexibility, application optimization, and superior resiliency. The 3650 Series switches support full IEEE 802.3at Power over Ethernet Plus (PoE+), Cisco Universal Power over Ethernet (Cisco UPOE®) on the Cisco Catalyst 3650 Series multigigabit switches, and offer modular and field-replaceable redundant fans and power supplies. The Cisco Catalyst 3650 Series Switches also come in a 12-inch lower depth (WS-C3650-24PDM/WS-C3650-48FQM only) form factor so that you can deploy them in tight wiring closets in remote branches and offices where depth of the switch is a concern.
All Cisco Catalyst 3650 Series Switches have fixed, built-in uplink ports. The table below provides high-level comparisons of the different available models in the Catalyst 3650 Series Switch family. You may view all models with:
All models can be purchased with LAN Base, IP Base, or IP Services software. Customers need to purchase the IP Base or the IP Services software-enabled models in order to use the Catalyst 3650 Series Switch as a wireless controller.
4 x Gigabit Ethernet with Small Form-Factor Pluggable (SFP) Uplinks
| Models | Total 10/100/1000 Ethernet Ports | Default AC Power Supply | Available PoE Power |
|---|---|---|---|
| WS-C3650-24TS | 24 | 250 WAC | – |
| WS-C3650-48TS | 48 | 250 WAC | – |
| WS-C3650-24PS | 24 PoE+ | 640 WAC | 390 W |
| WS-C3650-48PS | 48 PoE+ | 640 WAC | 390 W |
| WS-C3650-48FS | 48 PoE+ | 1025 WAC | 775 W |
2 x 10 Gigabit Ethernet with SFP+ (or 4 x Gigabit Ethernet with SFP) Uplinks
| Models | Total 10/100/1000 Ethernet Ports | Default AC Power Supply | Available PoE Power |
|---|---|---|---|
| WS-C3650-24TD | 24 | 250 WAC | – |
| WS-C3650-48TD | 48 | 250 WAC | – |
| WS-C3650-24PD | 24 PoE+ | 640 WAC | 390 W |
| WS-C3650-24PDM | 24 PoE+ | Fixed 640 WAC | 390W |
| WS-C3650-48PD | 48 PoE+ | 640 WAC | 390 W |
| WS-C3650-48FD | 48 PoE+ | 1025 WAC | 775 W |
4 x 10 Gigabit Ethernet with SFP+ (or 4 x Gigabit Ethernet with SFP) Uplinks
| Models | Total 10/100/1000 Ethernet Ports | Default AC Power Supply | Available PoE Power |
|---|---|---|---|
| WS-C3650-48TQ | 48 | 250 WAC | – |
| WS-C3650-48PQ | 48 PoE+ | 640 WAC | 390 W |
| WS-C3650-48FQM | 48 PoE+ | Fixed 975 WAC | 775 W |
| WS-C3650-48FQ | 48 PoE+ | 1025 WAC | 775 W |
| WS-C3650-8X24UQ | 24 UPOE (with 8 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports) | 1100 WAC | 820W |
| WS-C3650-12X48UQ | 48 UPOE (with 12 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports) | 1100 WAC | 660W |
8 x 10 Gigabit Ethernet with SFP+ (or 8 x Gigabit Ethernet with SFP) Uplinks
| Models | Total 10/100/1000 Ethernet Ports | Default AC Power Supply | Available PoE Power |
|---|---|---|---|
| WS-C3650-12X48UR | 48 UPOE (with 12 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports) | 1100 WAC | 660W |
2 x 40 Gigabit Ethernet with QSFP+ Uplinks
| Models | Total 10/100/1000 Ethernet Ports | Default AC Power Supply | Available PoE Power |
|---|---|---|---|
| WS-C3650-12X48UZ | 48 UPOE (with 12 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports) | 1100 WAC | 660W |
Table 1. Cisco Catalyst 3650 Series Configurations
|
Fixed Uplinks |
||||
|
4 x Gigabit Ethernet with Small Form‑Factor Pluggable (SFP) |
||||
|
WS-C3650-24TD |
2 x 10 Gigabit Ethernet with SFP+ and 2 x 10 Gigabit Ethernet with SFP+ or |
24 |
250 WAC |
|
|
WS-C3650-48TD |
48 |
|
|
|
|
WS-C3650-24PD |
24 PoE+ |
640 WAC |
390 W |
|
|
WS-C3650-24PDM |
24 PoE+ |
Fixed 640 WAC |
390 W |
|
|
WS-C3650-48PD |
48 PoE+ |
640 WAC |
390 W |
|
|
WS-C3650-48FD |
48 PoE+ |
1025 WAC |
775 W |
|
|
WS-C3650-8X24PD |
24 PoE+ (with 8 100-Mbps and |
715 WAC |
435 W |
|
|
WS-C3650-12X48FD |
48 PoE+ (with 12 100-Mbps and |
1100 WAC |
660 W |
|
|
WS-C3650-48TQ |
4 x 10 Gigabit Ethernet with SFP+ or 4 x Gigabit Ethernet with SFP |
48 |
250 WAC |
|
|
WS-C3650-48PQ |
48 PoE+ |
640 WAC |
390 W |
|
|
WS-C3650-48FQ |
48 PoE+ |
1025 WAC |
775 W |
|
|
WS-C3650-48FQM |
48 PoE+ |
Fixed 975 WAC |
775 W |
|
|
WS-C3650-8X24UQ |
24 UPOE (with 8 100-Mbps and 1‑, 2.5-, 5-, and 10-Gbps ports) |
1100 WAC |
820 W |
|
|
WS-C3650-12X48UQ |
48 UPOE (with 12 100-Mbps and 1‑, 2.5-, 5-, and 10-Gbps ports) |
1100 WAC |
660 W |
|
|
WS-C3650-12X48UR |
8 x 10 Gigabit Ethernet with SFP+ or 8 x Gigabit Ethernet with SFP |
48 UPOE (with 12 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports) |
1100 WAC |
660 W |
|
WS-C3650-12X48UZ |
2 x 40 Gigabit Ethernet with QSFP+ |
48 UPOE (with 12 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports) |
1100 WAC |
660 W |
All Cisco Catalyst 3650 Series Switches have fixed, built-in uplink ports. Customers can choose from five types of uplink ports at the time of the switch purchase:
● Four Gigabit Ethernet with Small Form-Factor Pluggable (SFP)
● Two 10 Gigabit Ethernet with SFP+ and two 10 Gigabit Ethernet with SFP or four Gigabit Ethernet with SFP
● Four 10 Gigabit Ethernet with SFP+ or four Gigabit Ethernet with SFP
● Eight 10 Gigabit Ethernet with SFP+ or eight Gigabit Ethernet with SFP
● Two 40 Gigabit Ethernet with QSFP+
The SFP+ interface supports both 10 Gigabit Ethernet and Gigabit Ethernet ports. Refer to Table 1 for a description of the basic switch models and the corresponding uplink ports. Refer to Table 2 for a description of the various uplink port interface options.
Table 2. 1 and 10 Gigabit Fixed Uplink Configurations
Table 3. Switch Models and Corresponding Default Power Supplies
|
Models |
Support Secondary Power Supply |
||
|
Yes |
|||
|
Yes |
|||
|
Yes |
|||
|
Yes |
|||
|
Yes |
|||
|
24-port mini PoE switch |
Fixed 640 WAC |
390W |
No, but supports RPS 2300 |
|
48-port mini PoE switch |
Fixed 975 WAC |
775W |
No, but supports RPS 2300 |
|
24-port Multigigabit PoE switch |
PWR-C1-715WAC |
435 W |
Yes |
|
24-port Multigigabit UPOE switch |
PWR-C1-1100WAC |
820 W |
Yes |
|
48-port Multigigabit full PoE switch |
|
|
|
|
48-port Multigigabit UPOE switch |
660 W |
Yes |
The multigigabit switches support a different set of power supplies than the non-multigigabit switches. In addition the PWR-C1-350WAC is not supported on the multigigabit switches. In addition to the power supplies listed in Table 3, a 640W DC power supply is available at the time of order or as a spare on all non-multigigabit switch models. The DC power supply also delivers PoE capabilities for maximum flexibility (refer to Table 4 for available PoE budget with DC power supplies). Customers can mix and match the AC and DC power supplies in the two available power supply slots. Any of these power supplies can be installed in any of the switches.
Table 4. Available PoE with DC Power Supply
|
Model |
||
|
24-port PoE Switch (Multigigabit) |
1 |
160 W |
|
2 |
600 W |
|
|
48-port PoE Switch (Multigigabit) |
1 |
0 W |
|
2 |
440 W |
Power over Ethernet Plus (PoE+)
The Cisco Catalyst 3650 Series Switches support both PoE (IEEE 802.3af) and PoE+ (IEEE 802.3at standard), which provide up to 30 W of power per port. PoE removes the need for wall power to each PoE-enabled device and eliminates the cost for additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments. The 3650 Series can provide a lower TCO for deployments that incorporate Cisco IP phones, Cisco Aironet® wireless LAN (WLAN) access points, or any IEEE 802.3at-compliant end device. Table 5 shows the power supply combinations required for different PoE needs.
Table 5. Minimum Power Supply Requirements for Full PoE and PoE+
|
|
||
Table 6. Power Supply Requirements for Cisco UPOE
|
|
24-Port Multigigabit Cisco UPOE Switch |
48-Port Multigigabit Cisco UPOE Switch |
|
Cisco UPOE (60W per port) on all (24-port switch) or max. 29 ports (48-port switch) |
One 1100W and one 715W power supplies or two 1100W power supplies |
Two 1100W power supplies |
Cisco Catalyst 3650 Series Specifications:
Table 7 shows Cisco Catalyst 3650 Series Switches performance specifications.
Table 7. Cisco Catalyst 3650 Performance Specifications
Related Products
- desktop-columns-3 tablet-columns-2 mobile-columns-2
-
Cisco Firepower 9300: Ultra-high-performance NGFW, expandable as your needs grow
Availability: In stockOut of stock
-
ASA 5525-X with FirePOWER Services: Up to 1 Gbps FW Multiservice capable 8 X 1 GE 1 RU
Availability: In stockOut of stock
-
ASA 5555-X with FirePOWER Services: Up to 2 Gbps Multiservice capable 8 x 10/100/1000 1 RU
Availability: In stockOut of stock
-
Cisco 1941 Series : CISCO1941/K9, CISCO1941W-A/K9, CISCO1941W-P/K9, CISCO1941W-N/K9, CISCO1941W-C/K9, CISCO1941W-I/K9, and CISCO 1941W-T/K9
Availability: In stockOut of stock
Cisco® 1900 Series Integrated Services Routers build on 25 years of Cisco innovation and product leadership. The new platforms are architected to enable the next phase of branch-office evolution, providing rich media collaboration and virtualization to the branch while maximizing operational cost savings The Integrated Services Routers Generation 2 platforms are future-enabled with multi-core CPUs, Gigabit Ethernet switching with enhanced POE, and new energy monitoring and control capabilities while enhancing overall system performance. Additionally, a new Cisco IOS® Software Universal image and Services Ready Engine module enable you to decouple the deployment of hardware and software, providing a stable technology foundation which can quickly adapt to evolving network requirements. Overall, the Cisco 1900 Series offer unparalleled total cost of ownership savings and network agility through the intelligent integration of market leading security, unified communications, wireless, and application services.
-
Cisco 3900 Series :CISCO3945E/K9, CISCO3925E/K9, CISCO3945/K9, CISCO3925/K9
Availability: In stockOut of stock
Cisco® 3900 Series Integrated Services Routers build on 25 years of Cisco innovation and product leadership. The new Cisco Integrated Services Routers Generation 2 (ISR G2) platforms are architected to enable the next phase of branch-office evolution, providing rich-media collaboration and virtualization to the branch office while maximizing operational cost savings. The new routers support new high-capacity digital signal processors (DSPs) for future enhanced video capabilities, high-powered service modules with improved availability, multicore CPUs, Gigabit Ethernet switching with Cisco Enhanced Power over Ethernet (ePoE), and new energy visibility and control capabilities while enhancing overall system performance. Additionally, a new Cisco IOS®Software Universal image and Cisco Services Ready Engine (SRE) module enable you to decouple the deployment of hardware and software, providing a flexible technology foundation that can quickly adapt to evolving network requirements. Overall, the Cisco 3900 Series offers exceptional total cost of ownership (TCO) savings and network agility through the intelligent integration of market-leading security, unified communications, wireless, and application services.
-
CISCO1921/K9 : C1921 Modular Router, 2 GE, 2 EHWIC slots, 512DRAM, IP Base
Availability: In stockOut of stock
The Cisco 1921 builds on the best-in-class offering of the Cisco 1841 Integrated Services Routers. All Cisco 1900 Series Integrated Services Routers offer embedded hardware encryption acceleration, optional firewall, intrusion prevention, and advanced security services. In addition, the platforms support the industry’s widest range of wired and wireless connectivity options such as Serial, T1/E1, xDSL, Gigabit Ethernet, and third-generation (3G) wireless
-
Cisco Firepower 4100 Series:
Availability: In stockOut of stock
The Cisco Firepower™ Next-Generation Firewall (NGFW) is the industry’s first fully integrated, threat-focused next-gen firewall with unified management. It includes Application Visibility and Control (AVC), optional Firepower next-gen IPS (NGIPS), Cisco® Advanced Malware Protection (AMP), and URL Filtering. Cisco Firepower NGFW provides advanced threat protection before, during, and after attacks.
-
Catalyst 3850 Series
Availability: In stockOut of stock
The Cisco Catalyst 3850 Series Switches are the next generation of enterprise-class, stackable, access layer switches. They provide full convergence between wired and wireless networks on a single platform. This convergence is built on the resilience of the new, 480 Gbps Cisco StackWise and Cisco StackPower technologies.
The following table provides high-level comparisons of the different models available in the Cisco Catalyst 3850 Series Switch family. You may view all models with:
-
CISCO2900 Series : CISCO2901/K9, CISCO2911/K9, CISCO2921/K9, CISCO2951/K9
Availability: In stockOut of stock
Cisco® 2900 Series Integrated Services Routers build on 25 years of Cisco innovation and product leadership. The new platforms are architected to enable the next phase of branch-office evolution, providing rich media collaboration and virtualization to the branch while maximizing operational cost savings The Integrated Services Routers Generation 2 platforms are future-enabled with multi-core CPUs, support for high capacity DSPs (Digital Signal Processors) for future enhanced video capabilities, high powered service modules with improved availability, Gigabit Ethernet switching with enhanced POE, and new energy monitoring and control capabilities while enhancing overall system performance
Đánh giá
Chưa có đánh giá nào.