MTS8000 Series Switch – MAMMUTHUS Layer3 Modular Core Switch
Modular core switch
MTS8000 series switch has compact configuration and powerful extension capability. The switch provides industry-leading SFP+/QSFP port density inside 6U outline. Besides, it provides lots of port in various types and can support PoE/PoE+. MTS8000, together with other switches in Mammuthus series, provides an end-to-end total network solution.
MTS8000 series switch have dual redundant engines and 3 media module slots and it is able to support GE, SFP, SFP+ and QSFP type of ports. Moreover, all software function can be implemented on all these ports. No matter serve as a spine node in spine-leaf topology or as a core node in traditional topology, MTS8000 can play its best part. The device support openflow 1.3 SDN controller.
MTS8000 has enhanced L2/L3 feature set and is able to support data center level network. The switch support router protocols such as OSPF/BGP/ISIS and so on, it also support core routing protocol such as MPBGP/MPLS. The switch also supports stacking and MCLAG, which can provide a higher level network redundancy and performance. Besides, MTS8000 support all switching/routing feature sets of MTS2700 & MTS2800 and can offer continuous security strategy and configuration logic.
Related Products
- desktop-columns-3 tablet-columns-2 mobile-columns-2
-
MTS2700 Series Switch – MAMMUTHUS Layer3 PoE/PoE+ Gigabit Ethernet Switch with 10G Uplink Ports
Availability: In stockOut of stock
Access/aggregation switches that have comprehensive function with PoE/PoE+
MTS2700 series switches provides a whole set of access solution, which is able to support complex network design. The switches can prevent unauthorized network access or mitigate the impact of network attacks via plenty of security features.
All RJ45 ports in MTS2700 series switches support PoE/PoE+ function, which are able to provide up to 30W power supply for the PoE PD device, such as webcam, IP telephone etc. What’s more, modular PSUs can provide FRU and the device can work properly under maximum temperature up to 55°C.
MTS2700 switches have comprehensive L2/L3 feature set, which can provide flexible, reliable and secure choice for network planning. Network consultant can enhance network security via DAI/DHCP snooping or can optimize multicast via IGMP snooping or can use broadcast control to ensure the network stability when UMB flooding.
-
MTS2600 Series Switch – MAMMUTHUS Layer2 Gigabit Ethernet Switch with 10G Uplink Ports
Availability: In stockOut of stock
MTS2600 series switch is the entry level access switch in Mammuthus series, providing sufficient performances and flexible functions. 10 Gigabit port is available so uplink speed to core switch is assured.
All RJ45 ports in MTS2600 series switch support auto-negotiation and MDI/MDI-X, and all SFP+ slots can work under 1/10G mode. All SFP+ slots support 1G and 10G MTS SFP modules, including fiber and UTP/STP*.
* detailed information please see SFP chapter in this brochure.For higher port density and performance at access level, MTS2600 supports stacking and downlink-oversubscribe design, in which 24 GE access ports couples with 4 10G SFP+ uplink ports. Since the MTS2600 series switch supports ERPS and have hardware based broadcast control, the switch can be deployed in ring topology.
-
JH559A: Arista 7280R 24QSFP+ 12QSFP28 Back-to-Front AC Switch
Availability: In stockOut of stock
The Arista 7280R Data Center Switch Router Series offers purpose-built, fixed-configuration 10/40/100GbE systems, specifically designed for the largest scale data centers. The routers combine scalable L2 and L3 resources and high density with advanced features for network monitoring, precision timing and network virtualization to deliver scalable and deterministic network performance simplifying designs and reducing expenses. The series runs Arista EOS a modular switch operating system with advanced monitoring and a unique state sharing architecture used by all Arista products.
What’s new
- A choice of 10GBASE-T or 10GbE SFP+ with 40/100GbE QSFP uplinks.
- A choice of 1RU and 2RU 40/100GbE systems.
- Flexible interface speeds including 25GbE and 50GbE.
- Ultra-deep packet buffer up to 32GB.
-
MTS2800 series switch – MAMMUTHUS Layer3 Gigabit Ethernet Switch with 10G Uplink Ports
Availability: In stockOut of stock
Access/aggregation switches that can offer comprehensive L2/L3 feature sets
MTS2800 series switches provide a whole set of access and aggregation solution. All switches in this series are equipped with redundant PSUs. The switches has compact mechanical design with low noise which can fit in with 600mm × 600mm compact cabinet. In addition, the switches can work properly under maximum temperature up to 55°C.
All the RJ45 ports in MTS2800 series switches support auto-negotiation and MDI/MDI-X. The switches can be applied to various working situations such as desktop, ELV room and data aggregation layer. The switches have 4 or 6 SFP+ slots and support stacking configuration, which can eliminate single point of failure and provide MC-LAG.
-
MTS2900 Series Switch – MAMMUTHUS Layer3 10Gigabit Ethernet Core Switch with 40G Uplink Ports
Availability: In stockOut of stock
High capacity aggregation/core switch
MTS2900 series switch provides industry leading ports density and switching speed. It
not only serves as a core switch, combined with MTS2600/MTS2700/MTS2800 to offer compact data network solutions, but also works as a aggregation switch, with MTS8000 to offer large network solutions.MTS2900 series switch offers 48 SFP+ slots, all these slots support 1G/10G SFP modules and support multiple SFP application that varies from 550m multi-mode SFP to 80km single-mode SFP+. The 40G QSFP in MTS2900 can offer high-speed uplink/interconnection links. The switch can be used in deployment model basing on spine-leaf and can support openflow 1.3 SDN controller.
-
SMT2200I: APC Smart-UPS 2200VA LCD 230V
Availability: In stockOut of stock
APC Smart-UPS 2200VA LCD 230V
Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes : CD with software , Documentation CD , Smart UPS signalling RS-232 cable , USB cable
-
WV-S2110: Super Dynamic HD Dome Network Camera
Availability: In stockOut of stock
HD / 1,280 x 720 60 fps H.265 Network Camera featuring Super Dynamic
Đánh giá
Chưa có đánh giá nào.