JG961A: 1950 48G 2SFP+ 2XGT, 52 Port Switch
HPE OfficeConnect 1950 Series switches are HPE’s most advanced high performance web managed “smart” switches with Gigabit ports and 10 Gigabit uplinks. This model has 48x 10/100/1000 ports plus two 10GBASE T copper ports and two SFP+ ports for SFP+/SFP fiber connections. In high-performance small business environments, use the 1950 10G Aggregator (JH295A) as a core switch interconnected with 10-Gigabit to other 1950 switch models providing Gigabit edge connections. Key features include true stacking, Layer 3 static routing, Access Control Lists and 802.1X network login. Additional features include three levels of Spanning Tree Protocol — STP, RSTP, MSTP — IPv4/IPv6 management and routing, STP root guard, and ARP and DOS attack protection. Part of the OfficeConnect portfolio of small business networking products from Hewlett Packard Enterprise.
- True 4-high stacking on edge switches; 2-high stacking on the aggregator switch
- Layer 3 routing with 32 static routes
- Enhanced network security with ACLs and network login
- Usability and feature set optimized for smaller networks
- Limited Lifetime Warranty
Smart Managed Switch
IPv6 Host / Management
IPv6 Routing
Functionality:
Layer 3 Lite
Predominant Port Type:
1 GbE Gigabit Copper
Uplink Type:
- 10 GbE Fiber
- 10 GbE Copper BaseT
- 10 GbE Copper DAC
- 1 GbE Gigabit Copper
- 1 GbE Gigabit Fiber
Other Features:
- Stacking
- VLAN Support
- Active VLANs (4K)
- Link Aggregation
- Access Control Lists (512)
- Static Routes (32)
- Routing Interfaces (8)
| HPE OfficeConnect 1950 48G 2SFP+ 2XGT Switch (JG961A) | ||
| I/O ports and slots | 48 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) | |
| 2 SFP+ fixed 1000/10000 SFP+ ports | ||
| 2 RJ-45 1/10GBASE-T ports | ||
| Additional ports and slots | 1 RJ-45 console port to access limited CLI port | |
| Physical characteristics | Dimensions | 17.32(w) x 10.63(d) x 1.73(h) in (44 x 27 x 4.4 cm) (1U height) |
| Weight | 11.02 lb (5 kg) | |
| Memory and processor | 128 MB flash; Packet buffer size: 3 MB, 1 GB SDRAM | |
| Mounting and enclosure | Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included) | |
| Performance | 100 Mb Latency | < 5 µs |
| 1000 Mb Latency | < 5 µs | |
| 10 Gbps Latency | < 1.5 µs | |
| Throughput | up to 130.9 Mpps (64-byte packets) | |
| Routing/Switching capacity | 176 Gbps | |
| Routing table size | 32 entries (IPv4), 32 entries (IPv6) | |
| MAC address table size | 16384 entries | |
| Reliability | MTBF (years) | 51 |
| Environment | Operating temperature | 32°F to 113°F (0°C to 45°C) |
| Operating relative humidity | 10% to 90%, noncondensing | |
| Nonoperating/Storage temperature | -40°F to 158°F (-40°C to 70°C) | |
| Nonoperating/Storage relative humidity | 5% to 95%, noncondensing | |
| Altitude | up to 16,404 ft (5 km) | |
| Acoustic | Low-speed fan: 38.4 dB, High-speed fan: 47.0 dB; ISO 7779 Dual speed fan | |
| Electrical characteristics | Frequency | 50/60 Hz |
| Voltage | 100 – 240 VAC, rated | |
| Maximum power rating | 54 W | |
| Notes | Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. | |
| Safety | UL 60950; IEC 60950-1; EN 60950-1; GB 4943.1 | |
| Emissions | FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A | |
| Management | IMC – Intelligent Management Center; Limited command-line interface; Web browser; SNMP Manager; HTTPS; RMON1; FTP; Supported by HPE IMC and generic SNMP management platforms. Refer to documentation for MIB support details. | |
| Notes | Transceivers under accessories are recommended versions. Here is the list of fully supported transceivers. 10G SFP+: JD092B, JD093B, JD094B, JG234A, J9150A, J9151A, J9153A. GE SFP: JD118B, JD119B, JD089B, J4858C, J4859C, J8177C. | |
| Services | Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. | |
| HPE OfficeConnect 1950 24G 2SFP+ 2XGT PoE+ Switch (JG962A) | ||
| I/O ports and slots | 24 RJ-45 auto-negotiating 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE, IEEE 802.3at) | |
| 2 SFP+ fixed 1000/10000 SFP+ ports | ||
| 2 RJ-45 1/10GBASE-T ports | ||
| Additional ports and slots | 1 RJ-45 console port to access limited CLI port | |
| Physical characteristics | Dimensions | 17.32(w) x 14.17(d) x 1.73(h) in (44 x 36 x 4.4 cm) (1U height) |
| Weight | 13.23 lb (6 kg) | |
| Memory and processor | 128 MB flash; Packet buffer size: 1.5 MB, 1 GB SDRAM | |
| Mounting and enclosure | Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included) | |
| Performance | 100 Mb Latency | < 5 µs |
| 1000 Mb Latency | < 5 µs | |
| 10 Gbps Latency | < 1.5 µs | |
| Throughput | up to 95.2 Mpps (64-byte packets) | |
| Routing/Switching capacity | 128 Gbps | |
| Routing table size | 32 entries (IPv4), 32 entries (IPv6) | |
| MAC address table size | 16384 entries | |
| Reliability | MTBF (years) | 44.4 |
| Environment | Operating temperature | 32°F to 113°F (0°C to 45°C) |
| Operating relative humidity | 10% to 90%, noncondensing | |
| Nonoperating/Storage temperature | -40°F to 158°F (-40°C to 70°C) | |
| Nonoperating/Storage relative humidity | 5% to 95%, noncondensing | |
| Altitude | up to 16,404 ft (5 km) | |
| Acoustic | Low-speed fan: 37.3 dB, High-speed fan: 47.1 dB; ISO 7779 Dual speed fan | |
| Electrical characteristics | Frequency | 50/60 Hz |
| Voltage | 100 – 240 VAC, rated | |
| Maximum power rating | 425 W | |
| PoE power | 370 W PoE+ | |
| Notes | Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies and may be supplemented with the use of an external power supply (EPS). When supplemented with the use of an HPE RPS1600 Redundant Power System, up to 720W of PoE+ can be supplied. Unit max. power consumption with RPS is 750W. |
|
| Safety | UL 60950; IEC 60950-1; EN 60950-1; GB 4943.1 | |
| Emissions | FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A | |
| Management | IMC – Intelligent Management Center; Limited command-line interface; Web browser; SNMP Manager; HTTPS; RMON1; FTP; Supported by HPE IMC and generic SNMP management platforms. Refer to documentation for MIB support details. | |
| Notes | Transceivers under accessories are recommended versions. Here is the list of fully supported transceivers. 10G SFP+: JD092B, JD093B, JD094B, JG234A, J9150A, J9151A, J9153A. GE SFP: JD118B, JD119B, JD089B, J4858C, J4859C, J8177C. | |
Related Products
- desktop-columns-3 tablet-columns-2 mobile-columns-2
-
AT-x310-50FP: 48-port 10/100BASE-T PoE+ switch with 2 combo ports (100/1000X SFP or 10/100/1000T) and 2 stacking ports.
Availability: In stockOut of stock
The Allied Telesis AT-x310-50FP features 48 Fast Ethernet ports with 2 Gigabit uplinks and 2 stacking ports.
The ability to stack up to 4 units simplifies management in high port-density installations, and Power over Ethernet (PoE+) can supply power to Enterprise edge devices such as IP phones.
-
AT-x510-52GTX: 48-port 10/100/1000T stackable switch with 4 SFP+ ports and 2 fixed power supplies.
Availability: In stockOut of stock
The Allied Telesis AT-x510-52GTX stackable Gigabit edge switch features 48 x 10/100/1000T ports and 4 x 10G/1G SFP+ uplink ports with two internal load-sharing AC power supplies for high reliability.
Combined with VCStack™ — which allows devices to be stacked to create highly resilient solutions that can be distributed over long-distances — the AT-x510-52GTX is the perfect choice for critical applications requiring uninterrupted service. The x510 Series also offers a comprehensive security feature set that enables secure Edge solutions for enterprise, healthcare, education and government applications.
-
AT-AR4050S – 2 x GE WAN and 8 x 10/100/1000 LAN with Quad core 1.5Ghz CPU, 2Gb RAM, Required Net.Cover for software maintenance.
Availability: In stockOut of stock
Application: NextGen FirewallWAN Uplink Media: FiberWAN Uplink Speed: 1 GbpsWAN Port Count: 2LAN Port Count: 8LAN Port Speed: 1 Gbps -
AT-x310-26FP: 24-port 10/100BASE-T PoE+ switch with 2 combo ports (100/1000X SFP or 10/100/1000T) and 2 stacking ports.
Availability: In stockOut of stock
The Allied Telesis AT-x310-26FP features 24 Fast Ethernet ports with 2 Gigabit uplinks and 2 stacking ports. Power over Ethernet Plus (PoE+) provides up to 30 watts to support high power connected devices such as multi-band wireless access points and Pan, Tilt, and Zoom digital security cameras.
-
AT-SBx8106: 6 Slot chassis including AT-SBx81FAN06, no power supplies.
Availability: In stockOut of stock
6-Slot Chassis
The AT-SBx8106 compact, 4RU advanced Layer 3+ chassis features 6 slots and an included fan module.
- Total slots: 6
- Control Fabric Card (CFC) Slots: 1 or 2
- Line Card Slots: 4 or 5
Two system and two PoE power supplies and a fan tray, along with the cards, are all hot-swappable.
-
AT-AR3050S: 2 x GE WAN and 8 x 10/100/1000 LAN with Dual core 800Mhz CPU, 1Gb RAM, Required Net.Cover for software maintenance
Availability: In stockOut of stock
Application: NextGen FirewallWAN Uplink Media: FiberWAN Uplink Speed: 1 GbpsWAN Port Count: 2LAN Port Count: 8LAN Port Speed: 1 Gbps -
AT-x310-26FT: 24-port 10/100BASE-T switch with 2 combo ports (100/1000X SFP or 10/100/1000T) and 2 stacking ports.
Availability: In stockOut of stock
The Allied Telesis AT-x310-26FT features 24 Fast Ethernet ports with 2 Gigabit uplinks and 2 stacking ports. An impressive set of features, matched with fanless operation, make it ideal for deployment in office environments.
-
AT-x930-28GPX: 24-port 10/100/1000T PoE+ stackable switch with 4 SFP+ ports and dual hotswap PSU bays, Required Net.Cover for software maintenance.
Availability: In stockOut of stock
The Allied Telesis x930-28GPX features 24 Gigabit ports with 4 10 Gigabit uplinks, and dual hot-swap power supplies for a fully resilient solution. Long-distance stacking of up to 8 units supports distributed environments, and Power over Ethernet provides the full 30 watts of PoE+ on all ports supporting today’s high-power devices.
-
AT-SBx3106: 6 Slot chassis including AT-SBxFAN06, no power supplies.
Availability: In stockOut of stock
The SwitchBlade x3106 is a compact, 6-slot access edge chassis designed for high density Ethernet FTTX solutions for communication service providers and enterprise Layer 2+ Ethernet secure aggregation. The AT-SBx3106 architecture ensures high availability service delivery with high density wirespeed Ethernet ports (10/100/1000 and 10 Gigabit) and non-blocking switching, all within a 4RU chassis. The SwitchBlade x3106 supports Fiber-to-the-Home with Gigabit Ethernet services and Power over Ethernet, featuring up to 80 Gigabits per slot and 10 Gigabit uplinks.
Đánh giá
Chưa có đánh giá nào.