JG960A: 1950 24G 2SFP+ 2XGT, 28 Port Switch
HPE OfficeConnect 1950 Series switches are HPE’s most advanced high performance web managed “smart” switches with Gigabit ports and 10 Gigabit uplinks. This model has 24x 10/100/1000 ports plus two 10GBASE T copper ports and two SFP+ ports for SFP+/SFP fiber connections. In high-performance small business environments, use the 1950 10G Aggregator (JH295A) as a core switch interconnected with 10-Gigabit to other 1950 switch models providing Gigabit edge connections. Key features include true stacking, Layer 3 static routing, Access Control Lists and 802.1X network login. Additional features include three levels of Spanning Tree Protocol — STP, RSTP, MSTP — IPv4/IPv6 management and routing, STP root guard, and ARP and DOS attack protection. Part of the OfficeConnect portfolio of small business networking products from Hewlett Packard Enterprise.
- True 4-high stacking on edge switches; 2-high stacking on the aggregator switch
- Layer 3 routing with 32 static routes
- Enhanced network security with ACLs and network login
- Usability and feature set optimized for smaller networks
- Limited Lifetime Warranty
Smart Managed Switch
IPv6 Host / Management
IPv6 Routing
Functionality:
Layer 3 Lite
Predominant Port Type:
1 GbE Gigabit Copper
Uplink Type:
- 10 GbE Fiber
- 10 GbE Copper BaseT
- 10 GbE Copper DAC
- 1 GbE Gigabit Copper
- 1 GbE Gigabit Fiber
Other Features:
- Stacking
- VLAN Support
- Active VLANs (4K)
- Link Aggregation
- Access Control Lists (512)
- Static Routes (32)
- Routing Interfaces (8)
| HPE OfficeConnect 1950 12XGT 4SFP+ Switch (JH295A) | ||
| I/O ports and slots | 12 RJ-45 1/10GBASE-T ports | |
| 4 SFP+ fixed 1000/10000 SFP+ ports | ||
| Additional ports and slots | 1 dual-personality (RJ-45 or Mini USB) console port to access limited CLI port 1 RJ-45 out-of-band management port |
|
| Physical characteristics | Dimensions | 17.32(w) x 6.3(d) x 1.73(h) in (44 x 16 x 4.4 cm) (1U height) |
| Weight | 8.07 lb (3.66 kg) | |
| Memory and processor | Cortex-A9 @ 1.25 MHz, 512 MB flash; Packet buffer size: 2 MB, 1 GB SDRAM | |
| Mounting and enclosure | Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included) | |
| Performance | 100 Mb Latency | < 5 µs |
| 1000 Mb Latency | < 5 µs | |
| 10 Gbps Latency | < 5 µs | |
| Throughput | up to 238 Mpps (64-byte packets) | |
| Routing/Switching capacity | 320 Gbps | |
| Routing table size | 512 entries (IPv4), 256 entries (IPv6) | |
| MAC address table size | 16384 entries | |
| Reliability | MTBF (years) | 81.8 |
| Environment | Operating temperature | 32°F to 113°F (0°C to 45°C) |
| Operating relative humidity | 10% to 90%, noncondensing | |
| Nonoperating/Storage temperature | -40°F to 158°F (-40°C to 70°C) | |
| Nonoperating/Storage relative humidity | 5% to 95%, noncondensing | |
| Altitude | up to 16,404 ft (5 km) | |
| Acoustic | ISO 7779 | |
| Electrical characteristics | Frequency | 50/60 Hz |
| Voltage | 100 – 240 VAC, rated | |
| Maximum power rating | 75 W | |
| Notes | Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. | |
| Safety | UL 60950; IEC 60950-1; EN 60950-1; GB 4943.1 | |
| Emissions | FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A | |
| Management | IMC – Intelligent Management Center; Limited command-line interface; Web browser; SNMP manager; HTTPS; RMON1; FTP; Supported by HP IMC and generic SNMP management platforms. Refer to documentation for MIB support details. | |
| Notes | Transceivers under accessories are recommended versions.
Here is the list of fully supported transceivers. 10G SFP+: JD092B, JD093B, JD094B, JG234A, J9150A, J9151A, J9152A, J9153A. GE SFP: JD118B, JD119B, JD089B, J4858C, J4859C, J8177C |
|
| Services | Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. | |
| HPE OfficeConnect 1950 24G 2SFP+ 2XGT Switch (JG960A) | ||
| I/O ports and slots | 24 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) | |
| 2 SFP+ fixed 1000/10000 SFP+ ports | ||
| 2 RJ-45 1/10GBASE-T ports | ||
| Additional ports and slots | 1 RJ-45 console port to access limited CLI port | |
| Physical characteristics | Dimensions | 17.17(w) x 6.3(d) x 1.73(h) in (43.6 x 16 x 4.4 cm) (1U height) |
| Weight | 6.61 lb (3 kg) | |
| Memory and processor | 128 MB flash; Packet buffer size: 1.5 MB, 1 GB SDRAM | |
| Mounting and enclosure | Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included) | |
| Performance | 100 Mb Latency | < 5 µs |
| 1000 Mb Latency | < 5 µs | |
| 10 Gbps Latency | < 1.5 µs | |
| Throughput | up to 95.2 Mpps (64-byte packets) | |
| Routing/Switching capacity | 128 Gbps | |
| Routing table size | 32 entries (IPv4), 32 entries (IPv6) | |
| MAC address table size | 16384 entries | |
| Reliability | MTBF (years) | 87.2 |
| Environment | Operating temperature | 32°F to 113°F (0°C to 45°C) |
| Operating relative humidity | 10% to 90%, noncondensing | |
| Nonoperating/Storage temperature | -40°F to 158°F (-40°C to 70°C) | |
| Nonoperating/Storage relative humidity | 5% to 95%, noncondensing | |
| Altitude | up to 16,404 ft (5 km) | |
| Acoustic | Low-speed fan: 19.0 dB, High-speed fan: 44.5 dB; ISO 7779 Dual speed fan | |
| Electrical characteristics | Frequency | 50/60 Hz |
| Voltage | 100 – 240 VAC, rated | |
| Maximum power rating | 34 W | |
| Notes | Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. | |
| Safety | UL 60950; IEC 60950-1; EN 60950-1; GB 4943.1 | |
| Emissions | FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A | |
| Management | IMC – Intelligent Management Center; Limited command-line interface; Web browser; SNMP Manager; HTTPS; RMON1; FTP; Supported by HPE IMC and generic SNMP management platforms. Refer to documentation for MIB support details. | |
| Notes | Transceivers under accessories are recommended versions. Here is the list of fully supported transceivers. 10G SFP+: JD092B, JD093B, JD094B, JG234A, J9150A, J9151A, J9153A. GE SFP: JD118B, JD119B, JD089B, J4858C, J4859C, J8177C. | |
Related Products
- desktop-columns-3 tablet-columns-2 mobile-columns-2
-
AT-x930-28GTX: 24-port 10/100/1000T stackable switch with 4 SFP+ ports and dual hotswap PSU bays, Required Net.Cover for software maintenance.
Availability: In stockOut of stock
The Allied Telesis x930-28GTX features 24 Gigabit ports with 4 10 Gigabit uplinks, and dual hot-swap power supplies for a fully resilient network core or distribution solution. Long-distance stacking of up to 8 units supports distributed environments, and Allied Telesis Management Framework (AMF) and Wireless Manager provide unified network management for your entire wired and wireless infrastructure.
-
AT-x510L-28GP: 24-port 10/100/1000T PoE+ switch with 4x1G SFP uplink ports (software upgradeable to 10G SFP+ ports) and a single fixed PSU
Availability: In stockOut of stock
The high-value Allied Telesis AT-x510L-28GP Gigabit edge switch features 24 x 10/100/1000T PoE+ ports and 4 x 1G/10G SFP+ uplink ports with a single internal power supply.
The x510L Series with Power over Ethernet (PoE+) is ideal for connecting and powering today’s converged networks, where IP phones and digital surveillance cameras share the data network. Allied Telesis x510L-GP switches provide cost-effective powered solutions for modern enterprise businesses.
-
AT-SBx8106: 6 Slot chassis including AT-SBx81FAN06, no power supplies.
Availability: In stockOut of stock
6-Slot Chassis
The AT-SBx8106 compact, 4RU advanced Layer 3+ chassis features 6 slots and an included fan module.
- Total slots: 6
- Control Fabric Card (CFC) Slots: 1 or 2
- Line Card Slots: 4 or 5
Two system and two PoE power supplies and a fan tray, along with the cards, are all hot-swappable.
-
AT-x510-28GPX: 24-port 10/100/1000T PoE+ stackable switch with 4 SFP+ ports and 2 fixed power supplies. Required Net.Cover for software maintenance for firmware v5.4.4 or later
Availability: In stockOut of stock
Allied Telesis x510 GPX Series stackable Gigabit switches power the edge in the network more efficiently than any others.
The AT-x510-28GPX features 24 x 10/100/1000T PoE+ ports and 4 x 10G/1G SFP+ uplink ports. It includes two internal power supplies for high reliability, as well as VCStack™, allowing devices to be stacked to create highly resilient solutions that can be distributed over long distances. The AT-x510-28GPX delivers up to 30 Watts per port (PoE+), perfect for supporting standard as well as Pan/Tilt/Zoom video surveillance and security cameras, wireless access points, IP phones, RFID readers, automatic doors and other PoE-powered devices. This PoE option eliminates the need for power rewiring and minimizes the clutter of power supplies and adapters in awkward places. The AT-x510-28GPX is designed for the edge of enterprises, retail, government, universities and medical campuses.
-
AT-x930-52GTX: 48-port 10/100/1000T stackable switch with 4 SFP+ ports and dual hotswap PSU bays, Required Net.Cover for software maintenance.
Availability: In stockOut of stock
The Allied Telesis x930-52GTX features 48 Gigabit ports with 4 10 Gigabit uplinks, and dual hot-swap power supplies for a fully resilient network core or distribution solution. Long-distance stacking of up to 8 units supports distributed environments, and Allied Telesis Management Framework (AMF) and Wireless Manager provide unified network management for your entire wired and wireless infrastructure.
-
AT-x930-28GPX: 24-port 10/100/1000T PoE+ stackable switch with 4 SFP+ ports and dual hotswap PSU bays, Required Net.Cover for software maintenance.
Availability: In stockOut of stock
The Allied Telesis x930-28GPX features 24 Gigabit ports with 4 10 Gigabit uplinks, and dual hot-swap power supplies for a fully resilient solution. Long-distance stacking of up to 8 units supports distributed environments, and Power over Ethernet provides the full 30 watts of PoE+ on all ports supporting today’s high-power devices.
-
AT-x310-26FP: 24-port 10/100BASE-T PoE+ switch with 2 combo ports (100/1000X SFP or 10/100/1000T) and 2 stacking ports.
Availability: In stockOut of stock
The Allied Telesis AT-x310-26FP features 24 Fast Ethernet ports with 2 Gigabit uplinks and 2 stacking ports. Power over Ethernet Plus (PoE+) provides up to 30 watts to support high power connected devices such as multi-band wireless access points and Pan, Tilt, and Zoom digital security cameras.
-
AT-AR3050S: 2 x GE WAN and 8 x 10/100/1000 LAN with Dual core 800Mhz CPU, 1Gb RAM, Required Net.Cover for software maintenance
Availability: In stockOut of stock
Application: NextGen FirewallWAN Uplink Media: FiberWAN Uplink Speed: 1 GbpsWAN Port Count: 2LAN Port Count: 8LAN Port Speed: 1 Gbps -
AT-x310-26FT: 24-port 10/100BASE-T switch with 2 combo ports (100/1000X SFP or 10/100/1000T) and 2 stacking ports.
Availability: In stockOut of stock
The Allied Telesis AT-x310-26FT features 24 Fast Ethernet ports with 2 Gigabit uplinks and 2 stacking ports. An impressive set of features, matched with fanless operation, make it ideal for deployment in office environments.
Đánh giá
Chưa có đánh giá nào.