JG928A: 1920 48G PoE+ (370W), 52 Port Switch
HPE OfficeConnect 1920 Series switches are advanced Gigabit web managed “smart” switches supporting Layer 3 static routing, Access Control Lists, 802.1X network login. This model has 48x 10/100/1000 PoE+ enabled ports plus four additional (non combo) Gigabit SFP ports for fiber connectivity. Notable additional features include three levels of Spanning Tree Protocol STP, RSTP, MSTP IPv4/IPv6 management and routing, STP root guard, and ARP and DOS attack protection. Part of the OfficeConnect portfolio of small business networking products from Hewlett Packard Enterprise.
- PoE model with 370W of available PoE/PoE+ power
- Layer 3 routing with 32 static routes
- Enhanced network security with ACLs and network login
- Future proof supporting IPv4 and IPv6
- Usability and feature set optimized for smaller networks
- Limited Lifetime Warranty
Smart Managed Switch
PoE
PoE+
IPv6 Host / Management
IPv6 Routing
Functionality:
Layer 3 Lite
Predominant Port Type:
1 GbE Gigabit Copper
Uplink Type:
- 1 GbE Gigabit Copper
- 1 GbE Gigabit Fiber
Other Features:
- VLAN Support
- Active VLANs (4K)
- Link Aggregation
- Access Control Lists (512)
- Static Routes (32)
- Routing Interfaces (8)
| HPE OfficeConnect 1920 8G Switch (JG920A) | ||
| I/O ports and slots | 8 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) | |
| 2 SFP 100/1000 Mbps slots (IEEE 802.3u Type 100BASE-FX, IEEE 802.3z Type 1000BASE-X | ||
| Supports a maximum of 8 autosensing 10/100/1000 ports plus 2 SFP 100/1000 slots | ||
| Additional ports and slots | 1 RJ-45 console port to access limited CLI port | |
| Physical characteristics | Dimensions | 10.47(w) x 6.38(d) x 1.73(h) in (26.6 x 16.2 x 4.4 cm) (1U height) |
| Weight | 1.98 lb (0.9 kg) | |
| Memory and processor | MIPS @ 500 MHz, 32 MB flash, 128 MB SDRAM; packet buffer size: 512 KB | |
| Mounting and enclosure | Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included), Wall Mount | |
| Performance | 100 Mb Latency | < 5 µs |
| 1000 Mb Latency | < 5 µs | |
| Throughput | 14.8 Mpps (64-byte packets) | |
| Routing/Switching capacity | 20 Gbps | |
| Routing table size | 32 entries (IPv4), 32 entries (IPv6) | |
| MAC address table size | 8192 entries | |
| Reliability | MTBF (years) | 128.20 |
| Environment | Operating temperature | 32°F to 104°F (0°C to 40°C) |
| Operating relative humidity | 10% to 90%, noncondensing | |
| Nonoperating/Storage temperature | -40°F to 158°F (-40°C to 70°C) | |
| Nonoperating/Storage relative humidity | 10% to 95%, noncondensing | |
| Altitude | up to 16,404 ft (5 km) | |
| Acoustic | Pressure: 0 dB No Fan | |
| Electrical characteristics | Frequency | 50/60 Hz |
| AC voltage | 100 – 240 VAC | |
| Maximum power rating | 9 W | |
| Notes | Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. | |
| Safety | UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03 | |
| Emissions | FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A | |
| Management | IMC – Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB | |
| Notes | SFP port and copper ports work simultaneously, independent of each other, to provide a total of 10 Gigabit switching ports. | |
Related Products
- desktop-columns-3 tablet-columns-2 mobile-columns-2
-
AT-SBx8106: 6 Slot chassis including AT-SBx81FAN06, no power supplies.
Availability: In stockOut of stock
6-Slot Chassis
The AT-SBx8106 compact, 4RU advanced Layer 3+ chassis features 6 slots and an included fan module.
- Total slots: 6
- Control Fabric Card (CFC) Slots: 1 or 2
- Line Card Slots: 4 or 5
Two system and two PoE power supplies and a fan tray, along with the cards, are all hot-swappable.
-
AT-x510L-52GT: 48-port 10/100/1000T switch with 4x1G SFP uplink ports (software upgradeable to 10G SFP+ ports) and a single fixed PSU
Availability: In stockOut of stock
The high-value Allied Telesis AT-x510L-52GT Gigabit edge switch features 48 x 10/100/1000T ports and 4 x 1G/10G SFP+ uplink ports with a single internal power supply.
The x510L Series offers cost-effective edge connectivity for healthcare, education, and government applications. Comprehensive security and access features protect online resources, while the ability to upgrade the uplink speed and feature-set ensure a future-proof solution.
-
AT-x930-52GPX: 48-port 10/100/1000T PoE+ stackable switch with 4 SFP+ ports and dual hotswap PSU bays, Required Net.Cover for software maintenance.
Availability: In stockOut of stock
The Allied Telesis x930-52GPX features 48 Gigabit ports with 4 10 Gigabit uplinks, and dual hot-swap power supplies for a fully resilient solution. Long-distance stacking of up to 8 units supports distributed environments, and Power over Ethernet provides the full 30 watts of PoE+ on all ports supporting today’s high-power devices
-
AT-x310-50FP: 48-port 10/100BASE-T PoE+ switch with 2 combo ports (100/1000X SFP or 10/100/1000T) and 2 stacking ports.
Availability: In stockOut of stock
The Allied Telesis AT-x310-50FP features 48 Fast Ethernet ports with 2 Gigabit uplinks and 2 stacking ports.
The ability to stack up to 4 units simplifies management in high port-density installations, and Power over Ethernet (PoE+) can supply power to Enterprise edge devices such as IP phones.
-
AT-x510DP-52GTX: 48-port 10/100/1000T stackable switch with 4 SFP+ ports and 2 hot-swappable power supplies– PSU’s not included
Availability: In stockOut of stock
The Allied Telesis AT-x510DP-52GTX is the ideal Data Center Top-of-Rack (ToR) switch, featuring 48 x 10/100/1000T ports and 4 x 10G SFP+ uplink ports for high speed server and storage connectivity.
Dual hot-swappable load-sharing AC or DC power supplies with reverse airflow guarantee maximum uptime. Allied Telesis VCStack allows multiple units to be connected as a single virtual chassis, creating a highly resilient solution with no single point of failure that can even be distributed over long distances. The AT-x510DP-52GTX is the perfect choice for critical Data Center applications requiring uninterrupted service.
-
AT-x510-28GTX: 24-port 10/100/1000T stackable switch with 4 SFP+ ports and 2 fixed power supplies.
Availability: In stockOut of stock
Stackable Gigabit SwitchThe Allied Telesis x510-28GTX features 24 x 10/100/1000T ports and 4 x 10G/1G SFP+ uplink ports with two internal load-sharing AC power supplies for high reliability.
Combined with VCStack™ — which allows devices to be stacked to create highly resilient solutions that can be distributed over long-distances — the AT-x510-28GTX is the perfect choice for critical applications requiring uninterrupted service. The x510 Series also offers a comprehensive security feature set that enables secure solutions for enterprise, healthcare, education and government applications.
-
AT-x510L-52GP: 48-port 10/100/1000T PoE+ switch with 4x1G SFP uplink ports (software upgradeable to 10G SFP+ ports) and a single fixed PSU.
Availability: In stockOut of stock
The high-value Allied Telesis x510L-52GP Gigabit edge switch features 48 x 10/100/1000T PoE+ ports and 4 x 1G/10G SFP+ uplink ports with a single internal power supply.
The x510L Series with Power over Ethernet (PoE+) is ideal for connecting and powering today’s converged networks, where IP phones and digital surveillance cameras share the data network. Allied Telesis x510L-GP switches provide cost-effective powered solutions for modern enterprise businesses.
-
AT-x510-52GPX/NC: 48-port 10/100/1000T PoE+ stackable switch with 4 SFP+ ports and 2 fixed power supplies.
Availability: In stockOut of stock
Allied Telesis x510 GPX Series stackable Gigabit switches power the edge in the network more efficiently than any others.
The AT-x510-52GPX stackable Gigabit edge switch features 48 x 10/100/1000T PoE+ ports and 4 x 10G/1G SFP+ uplink ports. It includes two internal power supplies for high reliability, as well as VCStack™, allowing devices to be stacked to create highly resilient solutions that can be distributed over long distances. The AT-x510-52GPX delivers up to 30 Watts per port (PoE+), perfect for supporting standard as well as Pan/Tilt/Zoom video surveillance and security cameras, wireless access points, IP phones, RFID readers, automatic doors and other PoE-powered devices. This PoE option eliminates the need for power rewiring and minimizes the clutter of power supplies and adapters in awkward places. The AT-x510-52GPX is designed for the edge of enterprises, retail, government, universities and medical
-
AT-x510L-28GT: 24-port 10/100/1000T switch with 4x1G SFP uplink ports (software upgradeable to 10G SFP+ ports) and a single fixed PSU.
Availability: In stockOut of stock
The high-value Allied Telesis AT-x510L-28GT Gigabit edge switch features 24 x 10/100/1000T ports and 4 x 1G/10G SFP+ uplink ports with a single internal power supply.
The x510L Series offers cost-effective edge connectivity for healthcare, education, and government applications. Comprehensive security and access features protect online resources, while the ability to upgrade the uplink speed and feature-set ensure a future-proof solution.
Đánh giá
Chưa có đánh giá nào.