JG925A: 1920 24G PoE+ (180W), 28 Port Switch
HPE OfficeConnect 1920 Series switches are advanced Gigabit web managed “smart” switches supporting Layer 3 static routing, Access Control Lists, 802.1X network login. This model has 24x 10/100/1000 PoE+ enabled ports plus four additional (non combo) Gigabit SFP ports for fiber connectivity. Notable additional features include three levels of Spanning Tree Protocol STP, RSTP, MSTP IPv4/IPv6 management and routing, STP root guard, and ARP and DOS attack protection. Part of the OfficeConnect portfolio of small business networking products from Hewlett Packard Enterprise.
- PoE model with 180W of available PoE/PoE+ power
- Layer 3 routing with 32 static routes
- Enhanced network security with ACLs and network login
- Future proof supporting IPv4 and IPv6
- Usability and feature set optimized for smaller networks
- Limited Lifetime Warranty
Smart Managed Switch
PoE
PoE+
IPv6 Host / Management
IPv6 Routing
Functionality:
Layer 3 Lite
Predominant Port Type:
1 GbE Gigabit Copper
Uplink Type:
- 1 GbE Gigabit Copper
- 1 GbE Gigabit Fiber
Other Features:
- VLAN Support
- Active VLANs (4K)
- Link Aggregation
- Access Control Lists (512)
- Static Routes (32)
- Routing Interfaces (8)
| HPE OfficeConnect 1920 8G Switch (JG920A) | ||
| I/O ports and slots | 8 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) | |
| 2 SFP 100/1000 Mbps slots (IEEE 802.3u Type 100BASE-FX, IEEE 802.3z Type 1000BASE-X | ||
| Supports a maximum of 8 autosensing 10/100/1000 ports plus 2 SFP 100/1000 slots | ||
| Additional ports and slots | 1 RJ-45 console port to access limited CLI port | |
| Physical characteristics | Dimensions | 10.47(w) x 6.38(d) x 1.73(h) in (26.6 x 16.2 x 4.4 cm) (1U height) |
| Weight | 1.98 lb (0.9 kg) | |
| Memory and processor | MIPS @ 500 MHz, 32 MB flash, 128 MB SDRAM; packet buffer size: 512 KB | |
| Mounting and enclosure | Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included), Wall Mount | |
| Performance | 100 Mb Latency | < 5 µs |
| 1000 Mb Latency | < 5 µs | |
| Throughput | 14.8 Mpps (64-byte packets) | |
| Routing/Switching capacity | 20 Gbps | |
| Routing table size | 32 entries (IPv4), 32 entries (IPv6) | |
| MAC address table size | 8192 entries | |
| Reliability | MTBF (years) | 128.20 |
| Environment | Operating temperature | 32°F to 104°F (0°C to 40°C) |
| Operating relative humidity | 10% to 90%, noncondensing | |
| Nonoperating/Storage temperature | -40°F to 158°F (-40°C to 70°C) | |
| Nonoperating/Storage relative humidity | 10% to 95%, noncondensing | |
| Altitude | up to 16,404 ft (5 km) | |
| Acoustic | Pressure: 0 dB No Fan | |
| Electrical characteristics | Frequency | 50/60 Hz |
| AC voltage | 100 – 240 VAC | |
| Maximum power rating | 9 W | |
| Notes | Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. | |
| Safety | UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03 | |
| Emissions | FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A | |
| Management | IMC – Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB | |
| Notes | SFP port and copper ports work simultaneously, independent of each other, to provide a total of 10 Gigabit switching ports. | |
| Services | Refer to the Hewlett Packard Enterprise website athttp://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. | |
| HPE OfficeConnect 1920 8G PoE+ (65W) Switch (JG921A) | ||
| I/O ports and slots | 8 RJ-45 auto-negotiating 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE, IEEE 802.3at) | |
| 2 SFP 100/1000 Mbps slots (IEEE 802.3u Type 100BASE-FX, IEEE 802.3z Type 1000BASE-X | ||
| S Supports a maximum of 8 autosensing 10/100/1000 ports plus 2 SFP 100/1000 slots | ||
| Additional ports and slots | 1 RJ-45 console port to access limited CLI port | |
| Physical characteristics | Dimensions | 12.99(w) x 9.06(d) x 1.73(h) in (33 x 23 x 4.4 cm) (1U height) |
| Weight | 6.5 lb (2.95 kg) | |
| Memory and processor | MIPS @ 500 MHz, 32 MB flash, 128 MB SDRAM; packet buffer size: 512 KB | |
| Mounting and enclosure | Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included) | |
| Performance | 100 Mb Latency | < 5 µs |
| 1000 Mb Latency | < 5 µs | |
| Throughput | 14.8 Mpps (64-byte packets) | |
| Routing/Switching capacity | 20 Gbps | |
| Routing table size | 32 entries (IPv4), 32 entries (IPv6) | |
| MAC address table size | 8192 entries | |
| Reliability | MTBF (years) | 76.33 |
| Environment | Operating temperature | 32°F to 104°F (0°C to 40°C) |
| Operating relative humidity | 10% to 90%, noncondensing | |
| Nonoperating/Storage temperature | -40°F to 158°F (-40°C to 70°C) | |
| Nonoperating/Storage relative humidity | 10% to 95%, noncondensing | |
| Altitude | up to 16,404 ft (5 km) | |
| Acoustic | Pressure: 0 dB No Fan | |
| Electrical characteristics | Frequency | 50/60 Hz |
| AC voltage | 100 – 240 VAC | |
| Maximum power rating | 94 W | |
| PoE power | 65 W PoE+ | |
| Notes | Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies. |
|
| Safety | UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03 | |
| Emissions | FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A | |
| Management | IMC – Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB | |
| Notes | SFP port and copper ports work simultaneously, independent of each other, to provide a total of 10 Gigabit switching ports. | |
| Services | Refer to the Hewlett Packard Enterprise website athttp://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. | |
| HPE OfficeConnect 1920 8G PoE+ (180W) Switch (JG922A) | ||
| I/O ports and slots | 8 RJ-45 auto-negotiating 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE, IEEE 802.3at) | |
| 2 SFP 100/1000 Mbps slots (IEEE 802.3u Type 100BASE-FX, IEEE 802.3z Type 1000BASE-X | ||
| Supports a maximum of 8 autosensing 10/100/1000 ports plus 2 SFP 100/1000 slots | ||
| Additional ports and slots | 1 RJ-45 console port to access limited CLI port | |
| Physical characteristics | Dimensions | 12.99(w) x 9.06(d) x 1.73(h) in (33 x 23 x 4.4 cm) (1U height) |
| Weight | 7.05 lb (3.2 kg) | |
| Memory and processor | MIPS @ 500 MHz, 32 MB flash, 128 MB SDRAM; packet buffer size: 512 KB | |
| Mounting and enclosure | Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included) | |
| Performance | 100 Mb Latency | < 5 µs |
| 1000 Mb Latency | < 5 µs | |
| Throughput | 14.8 Mpps (64-byte packets) | |
| Routing/Switching capacity | 20 Gbps | |
| Routing table size | 32 entries (IPv4), 32 entries (IPv6) | |
| MAC address table size | 8192 entries | |
| Reliability | MTBF (years) | 64.51 |
| Environment | Operating temperature | 32°F to 104°F (0°C to 40°C) |
| Operating relative humidity | 10% to 90%, noncondensing | |
| Nonoperating/Storage temperature | -40°F to 158°F (-40°C to 70°C) | |
| Nonoperating/Storage relative humidity | 10% to 95%, noncondensing | |
| Altitude | up to 16,404 ft (5 km) | |
| Acoustic | Low-speed fan: 43.6 dB, High-speed fan: 51.5 dB; ISO 7779 | |
| Electrical characteristics | Frequency | 50/60 Hz |
| AC voltage | 100 – 240 VAC | |
| Maximum power rating | 235 W | |
| PoE power | 180 W PoE+ | |
| Notes | Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies. |
|
| Safety | UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03 | |
| Emissions | FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A | |
| Management | IMC – Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB | |
| Notes | SFP port and copper ports work simultaneously, independent of each other, to provide a total of 10 Gigabit switching ports. | |
| Services | Refer to the Hewlett Packard Enterprise website athttp://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. | |
| HPE OfficeConnect 1920 16G Switch (JG923A) | ||
| I/O ports and slots | 16 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) | |
| 4 SFP 100/1000 Mbps slots (IEEE 802.3u Type 100BASE-FX, IEEE 802.3z Type 1000BASE-X | ||
| Supports a maximum of 16 autosensing 10/100/1000 ports plus 4 SFP 100/1000 slots | ||
| Additional ports and slots | 1 RJ-45 console port to access limited CLI port | |
| Physical characteristics | Dimensions | 17.32(w) x 6.81(d) x 1.73(h) in (44 x 17.3 x 4.4 cm) (1U height) |
| Weight | 4.74 lb (2.15 kg) | |
| Memory and processor | MIPS @ 500 MHz, 32 MB flash, 128 MB SDRAM; packet buffer size: 512 KB | |
| Mounting and enclosure | Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included) | |
| Performance | 100 Mb Latency | < 5 µs |
| 1000 Mb Latency | < 5 µs | |
| Throughput | 29.8 Mpps (64-byte packets) | |
| Routing/Switching capacity | 40 Gbps | |
| Routing table size | 32 entries (IPv4), 32 entries (IPv6) | |
| MAC address table size | 8192 entries | |
| Reliability | MTBF (years) | 125 |
| Environment | Operating temperature | 32°F to 104°F (0°C to 40°C) |
| Operating relative humidity | 10% to 90%, noncondensing | |
| Nonoperating/Storage temperature | -40°F to 158°F (-40°C to 70°C) | |
| Nonoperating/Storage relative humidity | 10% to 95%, noncondensing | |
| Altitude | up to 16,404 ft (5 km) | |
| Acoustic | No Fan | |
| Electrical characteristics | Frequency | 50/60 Hz |
| AC voltage | 100 – 240 VAC | |
| Maximum power rating | 13 W | |
| Notes | Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. | |
| Safety | UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03 | |
| Emissions | FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A | |
| Management | IMC – Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB | |
| Notes | SFP ports and copper ports can work simultaneously, independent of each other, to provide a total of 20 Gigabit Ethernet-capable ports. | |
| Services | Refer to the Hewlett Packard Enterprise website athttp://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. | |
| HPE OfficeConnect 1920 24G Switch (JG924A) | ||
| I/O ports and slots | 24 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) | |
| 4 SFP 100/1000 Mbps slots (IEEE 802.3u Type 100BASE-FX, IEEE 802.3z Type 1000BASE-X | ||
| Supports a maximum of 24 autosensing 10/100/1000 ports plus 4 SFP 100/1000 slots | ||
| Additional ports and slots | 1 RJ-45 console port to access limited CLI port | |
| Physical characteristics | Dimensions | 17.32(w) x 6.81(d) x 1.73(h) in (44 x 17.3 x 4.4 cm) (1U height) |
| Weight | 4.96 lb (2.25 kg) | |
| Memory and processor | MIPS @ 500 MHz, 32 MB flash, 128 MB SDRAM; packet buffer size: 512 KB | |
| Mounting and enclosure | Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included) | |
| Performance | 100 Mb Latency | < 5 µs |
| 1000 Mb Latency | < 5 µs | |
| Throughput | 41.7 Mpps (64-byte packets) | |
| Routing/Switching capacity | 56 Gbps | |
| Routing table size | 32 entries (IPv4), 32 entries (IPv6) | |
| MAC address table size | 8192 entries | |
| Reliability | MTBF (years) | 120.48 |
| Environment | Operating temperature | 32°F to 104°F (0°C to 40°C) |
| Operating relative humidity | 10% to 90%, noncondensing | |
| Nonoperating/Storage temperature | -40°F to 158°F (-40°C to 70°C) | |
| Nonoperating/Storage relative humidity | 10% to 95%, noncondensing | |
| Altitude | up to 16,404 ft (5 km) | |
| Acoustic | No Fan | |
| Electrical characteristics | Frequency | 50/60 Hz |
| AC voltage | 100 – 240 VAC | |
| Maximum power rating | 19 W | |
| Notes | Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. | |
| Safety | UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03 | |
| Emissions | FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A | |
| Management | IMC – Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB | |
| Notes | SFP ports and copper ports can work simultaneously, independent of each other, to provide a total of 28 Gigabit Ethernet-capable ports. | |
| Services | Refer to the Hewlett Packard Enterprise website athttp://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. | |
| HPE OfficeConnect 1920 24G PoE+ (180W) Switch (JG925A) | ||
| I/O ports and slots | 24 RJ-45 auto-negotiating 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE, IEEE 802.3at) | |
| 4 SFP 100/1000 Mbps slots (IEEE 802.3u Type 100BASE-FX, IEEE 802.3z Type 1000BASE-X | ||
| Supports a maximum of 24 autosensing 10/100/1000 ports plus 4 SFP 100/1000 slots | ||
| Additional ports and slots | 1 RJ-45 console port to access limited CLI port | |
| Physical characteristics | Dimensions | 17.32(w) x 9.37(d) x 1.73(h) in (44 x 23.8 x 4.4 cm) (1U height) |
| Weight | 7.5 lb (3.4 kg) | |
| Memory and processor | MIPS @ 500 MHz, 32 MB flash, 128 MB SDRAM; packet buffer size: 512 KB | |
| Mounting and enclosure | Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included) | |
| Performance | 100 Mb Latency | < 5 µs |
| 1000 Mb Latency | < 5 µs | |
| Throughput | 41.7 Mpps (64-byte packets) | |
| Routing/Switching capacity | 56 Gbps | |
| Routing table size | 32 entries (IPv4), 32 entries (IPv6) | |
| MAC address table size | 8192 entries | |
| Reliability | MTBF (years) | 68.96 |
| Environment | Operating temperature | 32°F to 104°F (0°C to 40°C) |
| Operating relative humidity | 10% to 90%, noncondensing | |
| Nonoperating/Storage temperature | -40°F to 158°F (-40°C to 70°C) | |
| Nonoperating/Storage relative humidity | 10% to 95%, noncondensing | |
| Altitude | up to 16,404 ft (5 km) | |
| Acoustic | Power: 44.9 dB, Pressure: 53.3 dB; ISO 7779 | |
| Electrical characteristics | Frequency | 50/60 Hz |
| AC voltage | 100 – 240 VAC | |
| Maximum power rating | 235 W | |
| PoE power | 180 W PoE+ | |
| Notes | Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies. |
|
| Safety | UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03 | |
| Emissions | FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A | |
| Management | IMC – Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB | |
| Notes | SFP ports and copper ports work simultaneously, independent of each other, to provide a total of 28 Gigabit switching ports. | |
Related Products
- desktop-columns-3 tablet-columns-2 mobile-columns-2
-
AT-x510-28GSX: 24 x 100/1000X fiber access ports and 4 x 1G/10G SFP+ uplink ports
Availability: In stockOut of stock
Stackable Gigabit SwitchThe Allied Telesis x510-28GSX stackable Gigabit edge switch provides an advanced feature set for fiber networks, with 24 x 100/1000X fiber access ports and 4 x 1G/10G SFP+ uplink ports.
Two internal power supplies provide high reliability, and the power of VCStack™ allows multiple units to create a single virtual device for a highly resilient solution that can be distributed over long distances. The x510-28GSX is ideal for Network Service Providers, supporting fiber access solutions for FTTB (Fiber To The Building) or FTTH (Fiber To The Home), and is equally well-suited to enterprise customers who require total data security, or industrial applications, where the noise immunity of fiber connectivity provides a reliable network infrastructure.
-
AT-XS916MXT: 16-port stackable 10 Gigabit switch, with 12 x 100/1000/10G Base-T, and 4 x SFP+ ports.
Availability: In stockOut of stock
The Allied Telesis XS916MXT features 12 x 100/1000/10GBASE-T, and 4 x SFP+ ports, in a cost-effective compact package.
10 Gigabit copper server and storage connectivity is well catered for, as 2 units can use VCStack™ to create a single 32-port virtual switch, which still fits in a standard single rack-unit space.
-
AT-x510-52GTX: 48-port 10/100/1000T stackable switch with 4 SFP+ ports and 2 fixed power supplies.
Availability: In stockOut of stock
The Allied Telesis AT-x510-52GTX stackable Gigabit edge switch features 48 x 10/100/1000T ports and 4 x 10G/1G SFP+ uplink ports with two internal load-sharing AC power supplies for high reliability.
Combined with VCStack™ — which allows devices to be stacked to create highly resilient solutions that can be distributed over long-distances — the AT-x510-52GTX is the perfect choice for critical applications requiring uninterrupted service. The x510 Series also offers a comprehensive security feature set that enables secure Edge solutions for enterprise, healthcare, education and government applications.
-
AT-x510L-52GT: 48-port 10/100/1000T switch with 4x1G SFP uplink ports (software upgradeable to 10G SFP+ ports) and a single fixed PSU
Availability: In stockOut of stock
The high-value Allied Telesis AT-x510L-52GT Gigabit edge switch features 48 x 10/100/1000T ports and 4 x 1G/10G SFP+ uplink ports with a single internal power supply.
The x510L Series offers cost-effective edge connectivity for healthcare, education, and government applications. Comprehensive security and access features protect online resources, while the ability to upgrade the uplink speed and feature-set ensure a future-proof solution.
-
AT-XS916MXS: 16-port stackable 10 Gigabit switch, with 12 x SFP+, and 4 x 100/1000/10G Base-T ports.
Availability: In stockOut of stock
The Allied Telesis XS916MXS features 12 x SFP+, and 4 x 100/1000/10GBASE-T ports, in a cost-effective compact package.
Enterprise networks can benefit from 10 Gigabit aggregation of edge switches, as well as automated network management and zero-touch recovery with the Allied Telesis Management Framework (AMF). The AT-XS916MXS offers a scalable 10 Gigabit solution to meet the increasing traffic demands of today’s online services and applications.
-
AT-x930-52GTX: 48-port 10/100/1000T stackable switch with 4 SFP+ ports and dual hotswap PSU bays, Required Net.Cover for software maintenance.
Availability: In stockOut of stock
The Allied Telesis x930-52GTX features 48 Gigabit ports with 4 10 Gigabit uplinks, and dual hot-swap power supplies for a fully resilient network core or distribution solution. Long-distance stacking of up to 8 units supports distributed environments, and Allied Telesis Management Framework (AMF) and Wireless Manager provide unified network management for your entire wired and wireless infrastructure.
-
AT-DC2552XS/L3: 48-port SFP+ slot, 4-port QSFP slot, 1-port console port, 1-port management port, 2 slots for PWR, 2 slots for FAN. (PSU/FAN is not included: need to purchase PSU and FAN separately) [Maximum 2 PSU and 2 FAN / Minimum 1 PSU and 2 FAN].
Availability: In stockOut of stock
10 Gigabit Layer 3 Stackable SwitchFor a smarter enterprise data center, connect servers and storage facilities with a high-speed, low latency network fabric that is faster, greener and easy to manage.
Overview
- Provides high-density 10GbE connectivity in a resilient, stackable package
- Can accommodate a 1+1 resilient power supply
- Delivers 1280Gbps of switching fabric with ultra low sub-μsec latency
- Utilizes back to front airflow
- SDN ready and able to support OpenFlow v1.3
-
AT-x310-50FP: 48-port 10/100BASE-T PoE+ switch with 2 combo ports (100/1000X SFP or 10/100/1000T) and 2 stacking ports.
Availability: In stockOut of stock
The Allied Telesis AT-x310-50FP features 48 Fast Ethernet ports with 2 Gigabit uplinks and 2 stacking ports.
The ability to stack up to 4 units simplifies management in high port-density installations, and Power over Ethernet (PoE+) can supply power to Enterprise edge devices such as IP phones.
-
AT-AR3050S: 2 x GE WAN and 8 x 10/100/1000 LAN with Dual core 800Mhz CPU, 1Gb RAM, Required Net.Cover for software maintenance
Availability: In stockOut of stock
Application: NextGen FirewallWAN Uplink Media: FiberWAN Uplink Speed: 1 GbpsWAN Port Count: 2LAN Port Count: 8LAN Port Speed: 1 Gbps
Đánh giá
Chưa có đánh giá nào.