JG540A: 1910 48×10/100 ports, 2×10/100/1000 ports, and 2 non-combo Gigabit SFP ports
HPE OfficeConnect 1910 Series switches are Fast Ethernet web managed “smart” switches supporting Layer 3 static routing, Access Control Lists, 802.1X network login HP Networking’s most advanced Fast Ethernet smart switch offering. This model has 48x 10/100 ports, 2x 10/100/1000 ports, and two non combo Gigabit SFP ports for fiber connectivity. Notable additional features include three levels of Spanning Tree Protocol STP, RSTP, MSTP IPv4/IPv6 management and routing, STP root guard, and ARP and DOS attack protection. Part of the OfficeConnect portfolio of small business networking products from Hewlett Packard Enterprise.
- Layer 3 routing with 32 static routes
- Enhanced network security with ACLs and network login
- Future proof supporting IPv4 and IPv6
- Usability and feature set optimized for smaller networks
- Limited Lifetime Warranty
Smart Managed Switch
Fanless
IPv6 Host / Management
IPv6 Routing
Functionality:
Layer 3 Lite
Predominant Port Type:
100 Mb Fast Ethernet
Uplink Type:
- 1 GbE Gigabit Copper
- 1 GbE Gigabit Fiber
Other Features:
- VLAN Support
- Active VLANs (512)
- Link Aggregation
- Access Control Lists (1024)
- Static Routes (32)
- Routing Interfaces (8)
| HPE OfficeConnect 1910 48 Switch (JG540A) | ||
| Ports | 48 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Duplex: half or full 2 SFP 100/1000 Mbps slots (IEEE 802.3u Type 100BASE-FX, IEEE 802.3z Type 1000BASE-X) 2 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 1 RJ-45 console port to access limited CLI port Supports a maximum of 48 autosensing 10/100 ports plus 2 autosensing 10/100/1000 ports plus 2 SFP 100/1000 slots |
|
| Physical characteristics | Dimensions | 17.32(w) x 6.81(d) x 1.73(h) in (44 x 17.3 x 4.4 cm) (1U height) |
| Weight | 5.07 lb (2.3 kg) | |
| Memory and processor | Module | MIPS @ 500 MHz, 32 MB flash, 128 MB RAM; packet buffer size: 1.5 MB |
| Mounting and enclosure | Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included) | |
| Performance | 100 Mb Latency | < 5 µs |
| 1000 Mb Latency | < 5 µs | |
| Throughput | up to 13.1 Mpps (64-byte packets) | |
| Routing/Switching capacity | 17.6 Gb/s | |
| Routing table size | 32 entries (IPv4), 32 entries (IPv6) | |
| MAC address table size | 8192 entries | |
| Environment | Operating temperature | 32°F to 104°F (0°C to 40°C) |
| Operating relative humidity | 10% to 90%, noncondensing | |
| Non-operating/Storage temperature | -40°F to 158°F (-40°C to 70°C) | |
| Non-operating/Storage relative humidity | 10% to 95%, noncondensing | |
| Electrical characteristics | Frequency | 50/60 Hz |
| Voltage | 100 – 240 VAC, rated | |
| Maximum power rating | 22 W | |
| Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. | ||
| Safety | IEC 60950-1; EN 60950-1; UL 60950-1 2nd Edition; CSA C22.2 No. 60950-1-07 2nd Edition | |
| Emissions | FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A | |
| Management | IMC – Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB |
|
| Notes | SFP ports and copper ports can work simultaneously, independent of each other to give a total of 52 ports. | |
Related Products
- desktop-columns-3 tablet-columns-2 mobile-columns-2
-
AT-x510-52GTX: 48-port 10/100/1000T stackable switch with 4 SFP+ ports and 2 fixed power supplies.
Availability: In stockOut of stock
The Allied Telesis AT-x510-52GTX stackable Gigabit edge switch features 48 x 10/100/1000T ports and 4 x 10G/1G SFP+ uplink ports with two internal load-sharing AC power supplies for high reliability.
Combined with VCStack™ — which allows devices to be stacked to create highly resilient solutions that can be distributed over long-distances — the AT-x510-52GTX is the perfect choice for critical applications requiring uninterrupted service. The x510 Series also offers a comprehensive security feature set that enables secure Edge solutions for enterprise, healthcare, education and government applications.
-
AT-x930-28GPX: 24-port 10/100/1000T PoE+ stackable switch with 4 SFP+ ports and dual hotswap PSU bays, Required Net.Cover for software maintenance.
Availability: In stockOut of stock
The Allied Telesis x930-28GPX features 24 Gigabit ports with 4 10 Gigabit uplinks, and dual hot-swap power supplies for a fully resilient solution. Long-distance stacking of up to 8 units supports distributed environments, and Power over Ethernet provides the full 30 watts of PoE+ on all ports supporting today’s high-power devices.
-
AT-XS916MXS: 16-port stackable 10 Gigabit switch, with 12 x SFP+, and 4 x 100/1000/10G Base-T ports.
Availability: In stockOut of stock
The Allied Telesis XS916MXS features 12 x SFP+, and 4 x 100/1000/10GBASE-T ports, in a cost-effective compact package.
Enterprise networks can benefit from 10 Gigabit aggregation of edge switches, as well as automated network management and zero-touch recovery with the Allied Telesis Management Framework (AMF). The AT-XS916MXS offers a scalable 10 Gigabit solution to meet the increasing traffic demands of today’s online services and applications.
-
AT-x930-28GTX: 24-port 10/100/1000T stackable switch with 4 SFP+ ports and dual hotswap PSU bays, Required Net.Cover for software maintenance.
Availability: In stockOut of stock
The Allied Telesis x930-28GTX features 24 Gigabit ports with 4 10 Gigabit uplinks, and dual hot-swap power supplies for a fully resilient network core or distribution solution. Long-distance stacking of up to 8 units supports distributed environments, and Allied Telesis Management Framework (AMF) and Wireless Manager provide unified network management for your entire wired and wireless infrastructure.
-
AT-x510L-28GP: 24-port 10/100/1000T PoE+ switch with 4x1G SFP uplink ports (software upgradeable to 10G SFP+ ports) and a single fixed PSU
Availability: In stockOut of stock
The high-value Allied Telesis AT-x510L-28GP Gigabit edge switch features 24 x 10/100/1000T PoE+ ports and 4 x 1G/10G SFP+ uplink ports with a single internal power supply.
The x510L Series with Power over Ethernet (PoE+) is ideal for connecting and powering today’s converged networks, where IP phones and digital surveillance cameras share the data network. Allied Telesis x510L-GP switches provide cost-effective powered solutions for modern enterprise businesses.
-
AT-x510L-52GT: 48-port 10/100/1000T switch with 4x1G SFP uplink ports (software upgradeable to 10G SFP+ ports) and a single fixed PSU
Availability: In stockOut of stock
The high-value Allied Telesis AT-x510L-52GT Gigabit edge switch features 48 x 10/100/1000T ports and 4 x 1G/10G SFP+ uplink ports with a single internal power supply.
The x510L Series offers cost-effective edge connectivity for healthcare, education, and government applications. Comprehensive security and access features protect online resources, while the ability to upgrade the uplink speed and feature-set ensure a future-proof solution.
-
AT-SBx8112: 12 Slot chassis including AT-SBx81FAN12, no power supplies.
Availability: In stockOut of stock
12-Slot Chassis
The AT-SBx8112 7RU advanced Layer 3+ chassis features 12 slots and an included fan module.
- Total slots: 12
- Control Fabric Card (CFC) Slots: 2
- Line Card Slots: 10
Two system and two PoE power supplies and a fan tray, along with the cards, are all hot-swappable.
-
AT-SBx3106: 6 Slot chassis including AT-SBxFAN06, no power supplies.
Availability: In stockOut of stock
The SwitchBlade x3106 is a compact, 6-slot access edge chassis designed for high density Ethernet FTTX solutions for communication service providers and enterprise Layer 2+ Ethernet secure aggregation. The AT-SBx3106 architecture ensures high availability service delivery with high density wirespeed Ethernet ports (10/100/1000 and 10 Gigabit) and non-blocking switching, all within a 4RU chassis. The SwitchBlade x3106 supports Fiber-to-the-Home with Gigabit Ethernet services and Power over Ethernet, featuring up to 80 Gigabits per slot and 10 Gigabit uplinks.
-
AT-XS916MXT: 16-port stackable 10 Gigabit switch, with 12 x 100/1000/10G Base-T, and 4 x SFP+ ports.
Availability: In stockOut of stock
The Allied Telesis XS916MXT features 12 x 100/1000/10GBASE-T, and 4 x SFP+ ports, in a cost-effective compact package.
10 Gigabit copper server and storage connectivity is well catered for, as 2 units can use VCStack™ to create a single 32-port virtual switch, which still fits in a standard single rack-unit space.
Đánh giá
Chưa có đánh giá nào.