JG537A: 1910 8×10/100 PoE+ enabled ports and 2×10/100/1000 combo SFP Gigabit ports
HPE OfficeConnect 1910 Series switches are Fast Ethernet web managed “smart” switches supporting Layer 3 static routing, Access Control Lists, 802.1X network login HP Networking’s most advanced Fast Ethernet smart switch offering. This model has 8x 10/100 PoE+ enabled ports and two 10/100/1000 combo SFP Gigabit ports for fiber connectivity. This model support IEEE 802.3at Power over Ethernet standard with a power budget of 62W. Notable additional features include three levels of Spanning Tree Protocol STP, RSTP, MSTP IPv4/IPv6 management and routing, STP root guard, and ARP and DOS attack protection. Part of the OfficeConnect portfolio of small business networking products from Hewlett Packard Enterprise.
- Layer 3 routing with 32 static routes
- Enhanced network security with ACLs and network login
- Future proof supporting IPv4 and IPv6
- Usability and feature set optimized for smaller networks
- Limited Lifetime Warranty
Smart Managed Switch
PoE+
Fanless
IPv6 Host / Management
IPv6 Routing
Functionality:
Layer 3 Lite
Predominant Port Type:
100 Mb Fast Ethernet
Uplink Type:
- 1 GbE Gigabit Copper
- 1 GbE Gigabit Fiber
Other Features:
- VLAN Support
- Active VLANs (512)
- Link Aggregation
- Access Control Lists (1024)
- Static Routes (32)
- Routing Interfaces (8)
| HPE OfficeConnect 1910 8 PoE+ Switch (JG537A) | ||
| Ports | 8 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3at PoE+); Duplex: half or full 2 dual-personality ports; each port can be used as a RJ 45 10/100/1000 Mbps port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) or as a SFP 100/1000 Mbps slot (IEEE 802.3u Type 100BASE-FX, IEEE 802.3z Type 1000BASE-X) 1 RJ-45 console port to access limited CLI port Supports a maximum of 8 autosensing 10/100 ports plus 2 dual-personality ports either RJ-45 10/100/1000 port or SFP 100/1000 slot |
|
| Physical characteristics | Dimensions | 12.99(w) x 9.06(d) x 1.73(h) in (33 x 23 x 4.4 cm) (1U height) |
| Weight | 4.63 lb (2.1 kg) | |
| Memory and processor | Module | MIPS @ 500 MHz, 32 MB flash, 128 MB RAM; packet buffer size: 512 KB |
| Mounting and enclosure | Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included) | |
| Performance | 100 Mb Latency | < 5 µs |
| 1000 Mb Latency | < 5 µs | |
| Throughput | up to 4.2 Mpps (64-byte packets) | |
| Routing/Switching capacity | 5.6 Gb/s | |
| Routing table size | 32 entries (IPv4), 32 entries (IPv6) | |
| MAC address table size | 8192 entries | |
| Environment | Operating temperature | 32°F to 104°F (0°C to 40°C) |
| Operating relative humidity | 10% to 90%, noncondensing | |
| Non-operating/Storage temperature | -40°F to 158°F (-40°C to 70°C) | |
| Non-operating/Storage relative humidity | 10% to 95%, noncondensing | |
| Electrical characteristics | Frequency | 50/60 Hz |
| Voltage | 100 – 240 VAC, rated | |
| Maximum power rating | 90 W | |
| PoE power | 62 W | |
| Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE Power is the power supplied by the internal power supply, it is dependent on the type and quantity of power supplies and may be supplemented with the use of an External Power Supply (EPS). |
||
| Safety | IEC 60950-1; EN 60950-1; UL 60950-1 2nd Edition; CSA C22.2 No. 60950-1-07 2nd Edition | |
| Emissions | FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A | |
| Management | IMC – Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB |
|
| Notes | SFP ports and copper ports can work simultaneously, independent of each other to give a total of 10 ports. | |
Related Products
- desktop-columns-3 tablet-columns-2 mobile-columns-2
-
AT-x930-28GTX: 24-port 10/100/1000T stackable switch with 4 SFP+ ports and dual hotswap PSU bays, Required Net.Cover for software maintenance.
Availability: In stockOut of stock
The Allied Telesis x930-28GTX features 24 Gigabit ports with 4 10 Gigabit uplinks, and dual hot-swap power supplies for a fully resilient network core or distribution solution. Long-distance stacking of up to 8 units supports distributed environments, and Allied Telesis Management Framework (AMF) and Wireless Manager provide unified network management for your entire wired and wireless infrastructure.
-
AT-x510-28GPX: 24-port 10/100/1000T PoE+ stackable switch with 4 SFP+ ports and 2 fixed power supplies. Required Net.Cover for software maintenance for firmware v5.4.4 or later
Availability: In stockOut of stock
Allied Telesis x510 GPX Series stackable Gigabit switches power the edge in the network more efficiently than any others.
The AT-x510-28GPX features 24 x 10/100/1000T PoE+ ports and 4 x 10G/1G SFP+ uplink ports. It includes two internal power supplies for high reliability, as well as VCStack™, allowing devices to be stacked to create highly resilient solutions that can be distributed over long distances. The AT-x510-28GPX delivers up to 30 Watts per port (PoE+), perfect for supporting standard as well as Pan/Tilt/Zoom video surveillance and security cameras, wireless access points, IP phones, RFID readers, automatic doors and other PoE-powered devices. This PoE option eliminates the need for power rewiring and minimizes the clutter of power supplies and adapters in awkward places. The AT-x510-28GPX is designed for the edge of enterprises, retail, government, universities and medical campuses.
-
AT-SBx8106: 6 Slot chassis including AT-SBx81FAN06, no power supplies.
Availability: In stockOut of stock
6-Slot Chassis
The AT-SBx8106 compact, 4RU advanced Layer 3+ chassis features 6 slots and an included fan module.
- Total slots: 6
- Control Fabric Card (CFC) Slots: 1 or 2
- Line Card Slots: 4 or 5
Two system and two PoE power supplies and a fan tray, along with the cards, are all hot-swappable.
-
AT-x510DP-52GTX: 48-port 10/100/1000T stackable switch with 4 SFP+ ports and 2 hot-swappable power supplies– PSU’s not included
Availability: In stockOut of stock
The Allied Telesis AT-x510DP-52GTX is the ideal Data Center Top-of-Rack (ToR) switch, featuring 48 x 10/100/1000T ports and 4 x 10G SFP+ uplink ports for high speed server and storage connectivity.
Dual hot-swappable load-sharing AC or DC power supplies with reverse airflow guarantee maximum uptime. Allied Telesis VCStack allows multiple units to be connected as a single virtual chassis, creating a highly resilient solution with no single point of failure that can even be distributed over long distances. The AT-x510DP-52GTX is the perfect choice for critical Data Center applications requiring uninterrupted service.
-
AT-x310-50FP: 48-port 10/100BASE-T PoE+ switch with 2 combo ports (100/1000X SFP or 10/100/1000T) and 2 stacking ports.
Availability: In stockOut of stock
The Allied Telesis AT-x310-50FP features 48 Fast Ethernet ports with 2 Gigabit uplinks and 2 stacking ports.
The ability to stack up to 4 units simplifies management in high port-density installations, and Power over Ethernet (PoE+) can supply power to Enterprise edge devices such as IP phones.
-
AT-XS916MXT: 16-port stackable 10 Gigabit switch, with 12 x 100/1000/10G Base-T, and 4 x SFP+ ports.
Availability: In stockOut of stock
The Allied Telesis XS916MXT features 12 x 100/1000/10GBASE-T, and 4 x SFP+ ports, in a cost-effective compact package.
10 Gigabit copper server and storage connectivity is well catered for, as 2 units can use VCStack™ to create a single 32-port virtual switch, which still fits in a standard single rack-unit space.
-
AT-x310-26FP: 24-port 10/100BASE-T PoE+ switch with 2 combo ports (100/1000X SFP or 10/100/1000T) and 2 stacking ports.
Availability: In stockOut of stock
The Allied Telesis AT-x310-26FP features 24 Fast Ethernet ports with 2 Gigabit uplinks and 2 stacking ports. Power over Ethernet Plus (PoE+) provides up to 30 watts to support high power connected devices such as multi-band wireless access points and Pan, Tilt, and Zoom digital security cameras.
-
AT-DC2552XS/L3: 48-port SFP+ slot, 4-port QSFP slot, 1-port console port, 1-port management port, 2 slots for PWR, 2 slots for FAN. (PSU/FAN is not included: need to purchase PSU and FAN separately) [Maximum 2 PSU and 2 FAN / Minimum 1 PSU and 2 FAN].
Availability: In stockOut of stock
10 Gigabit Layer 3 Stackable SwitchFor a smarter enterprise data center, connect servers and storage facilities with a high-speed, low latency network fabric that is faster, greener and easy to manage.
Overview
- Provides high-density 10GbE connectivity in a resilient, stackable package
- Can accommodate a 1+1 resilient power supply
- Delivers 1280Gbps of switching fabric with ultra low sub-μsec latency
- Utilizes back to front airflow
- SDN ready and able to support OpenFlow v1.3
-
AT-x930-28GSTX: 24-port 10/100/1000T and 100/1000 SFP stackable switch with 4 SFP+ ports and dual hotswap PSU bays, Required Net.Cover for software maintenance.
Availability: In stockOut of stock
The Allied Telesis x930-28GSTX features 24 Gigabit combo ports with 4 10 Gigabit uplinks, providing the ability to mix copper and fiber connectivity for fully flexible deployment. Long-distance stacking of up to 8 units supports distributed environments, and Allied Telesis Management Framework (AMF) and Wireless Manager provide unified network management for your entire wired and wireless infrastructure.
Đánh giá
Chưa có đánh giá nào.