Aruba 210 Series : High-performance, cost-effective gigabit Wi-Fi for the enterprise
High-performance and cost-effective 210-series 802.11ac APs maximize mobile device performance in medium- to high-density Wi-Fi environments.
Leveraging three spatial streams, these dual-radio APs deliver wireless data rates up to 1.3 Gbps for 802.11ac and up to 450 Mbps for 802.11n-enabled mobile devices.
The AP-215 and IAP-215 models have six integrated omni-directional downtilt antennas, while the AP-214 and IAP-214 support external, detachable dual-band antennas using three RP-SMA connectors.
Datasheet :
http://www.arubanetworks.com/assets/ds/DS_AP210Series.pdf
-
-
210 SERIES ACCESS POINT SPECIFICATIONS - AP-215 and IAP-215
- 2.4-GHz (450 Mbps max rate) and 5-GHz (1.3 Gbps max rate) radios, each with 3×3 MIMO and six integrated omni-directional downtilt antennas.
- AP-214 and IAP-214
- 2.4-GHz (450 Mbps max rate) and 5-GHz (1.3 Gbps max rate) radios, each with 3×3 MIMO and three combined, diplexed (dual-band) external RP-SMA antenna connectors.
ADVANCED FEATURES - RF management
- Adaptive Radio Management™ (ARM) technology automatically assigns channel and power settings, provides airtime fairness and ensures that APs stay clear of all sources of RF interference to deliver reliable, high-performance WLANs.
- 210 series APs can be configured to provide part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, VPN tunnels to extend corporate resources to remote locations, and wireless mesh connections where Ethernet drops are not available.
- Spectrum analysis
- Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference
- Security
- Integrated wireless intrusion protection offers thread protection and mitigation, and eliminates the need for separate RF sensors and security appliances.
- IP reputation and security services identify, classify, and block malicious files, URL and IPs, providing comprehensive protection against advanced online threats.
- Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys.
- SecureJack-capable for secure tunneling of wired Ethernet traffic.
POWER - Maximum (worst-case) power consumption: 14.9 watts (PoE) or 13.6 watts (DC)
- Excludes power consumed by external USB device (and internal overhead); this could add up to 6 watts (PoE) or 5.5 watts (DC) for 5W/1A USB device
- Maximum (worst-case) power consumption in idle mode: 8.2 watts (PoE) or 7.4 watts (DC)
- Direct DC source: 12 Vdc nominal, +/- 5%
- Power over Ethernet: 48 Vdc (nominal) 802.3af/802.3at compliant source
- USB port is disabled when using an 802.3af PoE power source; for unrestricted operation with PoE power, use an 802.3at compliant source
- Power sources sold separately
- When both power sources are available, DC power takes priority
WIRELESS RADIO SPECIFICATIONS - AP type: Indoor, dual radio, 5 GHz 802.11ac and 2.4 GHz 802.11n 3×3:3
- Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1)
- 3×3 MIMO with three spatial streams and up to 1.3 Gbps wireless data rate
- Supported frequency bands (country-specific restrictions apply):
- 2.4000 to 2.4835 GHz
- 5.150 to 5.250 GHz
- 5.250 to 5.350 GHz
- 5.470 to 5.725 GHz
- 5.725 to 5.850 GHz
- Available channels: Dependent on configured regulatory domain
- Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
- Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum (DSSS)
- 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
- Supported modulation types:
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
- Transmit power: Configurable in increments of 0.5 dBm
- Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):
- 2.4-GHz band: +23 dBm (18 dBm per chain)
- 5-GHz band: +23 dBm (18 dBm per chain)
- Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain
- Advanced Cellular Coexistence (ACC) minimizes interference from LTE cellular networks
- Maximum ratio combining (MRC) for improved receiver performance
- Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
- Short guard interval for 20-MHz, 40-MHz and 80-MHz channels
- Space-time block coding (STBC) for increased range and improved reception
- Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
- Transmit beamforming (TxBF) for increased signal reliability and range
- Supported data rates (Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: 6.5 to 450 (MCS0 to MCS23)
- 802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS = 1 to 3)
- 802.11n high-throughput (HT) support: HT 20/40
- 802.11n/ac packet aggregation: A-MPDU, A-MSDU
- 802.11ac very high throughput (VHT) support: VHT 20/40/80
ANTENNAS - AP-214/IAP-214: Three RP-SMA connectors for external dual-band antennas. Internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 1.0 dB in 2.4 GHz and 2.0 dB in 5 GHz.
- AP-215/IAP-215: Six integrated downtilt omni-directional antennas for 3×3 MIMO with maximum antenna gain of 5.0 dBi in 2.4 GHz and 5.0 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. Downtilt angle for maximum gain is roughly 30 degrees.
- AP-215 and IAP-215
-
OTHER INTERFACES - One 10/100/1000BASE-T Ethernet network interface (RJ-45)
- Auto-sensing link speed and MDI/MDX
- 802.3az Energy Efficient Ethernet (EEE)
- PoE-PD: 48 Vdc (nominal) 802.3af or 802.3at PoE
- DC power interface, accepts 1.7/4.0-mm center-positive circular plug with 9.5-mm length
- USB 2.0 host interface (Type A connector)
- Visual indicators (LEDs):
- Power/system status
- Ethernet link status (ENET)
- Radio status (two; RAD0, RAD1)
- Reset button: factory reset (during device power-up)
- Serial console interface (RJ-45)
- Kensington security slot
MOUNTING - Included with AP:
- Mounting brackets (2) for attaching to 9/16-inch or 15/16-inch T-bar drop-tile ceiling
- Spare mounting kit:
- AP-220-MNT-C1: Aruba AP mount kit contains two ceiling-grid rail adapters for flat rails
- Optional mounting kits:
- AP-220-MNT-C2: Aruba AP mount kit contains two ceiling-grid rail adapters for Interlude and Silhouette style rails
- AP-220-MNT-W1: Aruba AP mount kit contains one flat-surface wall/ceiling mount bracket
- AP-220-MNT-W3: Aruba AP mount kit contains one flat-surface wall/ceiling secure mount cradle
MECHANICAL - Dimensions/weight (unit, excluding mount accessories):
- 180 mm x 180 mm x 45 mm (W x D x H)
- 610 g
- Dimensions/weight (shipping):
- 220 mm x 225 mm x 55 mm (W x D x H)
- 860 g
ENVIRONMENTAL - Operating:
- Temperature: 0° C to +50° C (+32° F to +122° F)
- Humidity: 5% to 93% non-condensing
- Storage and transportation:
- Temperature: -40° C to +70° C (-40° F to +158° F)
REGULATORY - FCC/Industry of Canada
- CE Marked
- R&TTE Directive 1999/5/EC
- Low Voltage Directive 2006/95/EC
- EN 300 328
- EN 301 489
- EN 301 893
- UL/IEC/EN 60950
- EN 60601-1-1, EN60601-1-2
CERTIFICATIONS - CB Scheme Safety, cTUVus
- UL2043 plenum rating
- Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac
WARRANTY Aruba limited lifetime warranty REGULATORY MODEL NUMBERS - AP-214 and IAP-214: APIN0214
- AP-215 and IAP-215: APIN0215
MINIMUM ARUBAOS VERSION - ArubaOS™ 6.4.2.0
- Aruba InstantOS™ 4.1.1.0
RELIABILITY - MTBF: 538,975 hours (61.5 years) at +25° C operating temperature
- One 10/100/1000BASE-T Ethernet network interface (RJ-45)
-
Related Products
- desktop-columns-3 tablet-columns-2 mobile-columns-2
-
AT-x930-28GPX: 24-port 10/100/1000T PoE+ stackable switch with 4 SFP+ ports and dual hotswap PSU bays, Required Net.Cover for software maintenance.
Availability: In stockOut of stock
The Allied Telesis x930-28GPX features 24 Gigabit ports with 4 10 Gigabit uplinks, and dual hot-swap power supplies for a fully resilient solution. Long-distance stacking of up to 8 units supports distributed environments, and Power over Ethernet provides the full 30 watts of PoE+ on all ports supporting today’s high-power devices.
-
AT-DC2552XS/L3: 48-port SFP+ slot, 4-port QSFP slot, 1-port console port, 1-port management port, 2 slots for PWR, 2 slots for FAN. (PSU/FAN is not included: need to purchase PSU and FAN separately) [Maximum 2 PSU and 2 FAN / Minimum 1 PSU and 2 FAN].
Availability: In stockOut of stock
10 Gigabit Layer 3 Stackable SwitchFor a smarter enterprise data center, connect servers and storage facilities with a high-speed, low latency network fabric that is faster, greener and easy to manage.
Overview
- Provides high-density 10GbE connectivity in a resilient, stackable package
- Can accommodate a 1+1 resilient power supply
- Delivers 1280Gbps of switching fabric with ultra low sub-μsec latency
- Utilizes back to front airflow
- SDN ready and able to support OpenFlow v1.3
-
AT-x510-52GPX/NC: 48-port 10/100/1000T PoE+ stackable switch with 4 SFP+ ports and 2 fixed power supplies.
Availability: In stockOut of stock
Allied Telesis x510 GPX Series stackable Gigabit switches power the edge in the network more efficiently than any others.
The AT-x510-52GPX stackable Gigabit edge switch features 48 x 10/100/1000T PoE+ ports and 4 x 10G/1G SFP+ uplink ports. It includes two internal power supplies for high reliability, as well as VCStack™, allowing devices to be stacked to create highly resilient solutions that can be distributed over long distances. The AT-x510-52GPX delivers up to 30 Watts per port (PoE+), perfect for supporting standard as well as Pan/Tilt/Zoom video surveillance and security cameras, wireless access points, IP phones, RFID readers, automatic doors and other PoE-powered devices. This PoE option eliminates the need for power rewiring and minimizes the clutter of power supplies and adapters in awkward places. The AT-x510-52GPX is designed for the edge of enterprises, retail, government, universities and medical
-
AT-x510DP-52GTX: 48-port 10/100/1000T stackable switch with 4 SFP+ ports and 2 hot-swappable power supplies– PSU’s not included
Availability: In stockOut of stock
The Allied Telesis AT-x510DP-52GTX is the ideal Data Center Top-of-Rack (ToR) switch, featuring 48 x 10/100/1000T ports and 4 x 10G SFP+ uplink ports for high speed server and storage connectivity.
Dual hot-swappable load-sharing AC or DC power supplies with reverse airflow guarantee maximum uptime. Allied Telesis VCStack allows multiple units to be connected as a single virtual chassis, creating a highly resilient solution with no single point of failure that can even be distributed over long distances. The AT-x510DP-52GTX is the perfect choice for critical Data Center applications requiring uninterrupted service.
-
AT-x310-50FP: 48-port 10/100BASE-T PoE+ switch with 2 combo ports (100/1000X SFP or 10/100/1000T) and 2 stacking ports.
Availability: In stockOut of stock
The Allied Telesis AT-x310-50FP features 48 Fast Ethernet ports with 2 Gigabit uplinks and 2 stacking ports.
The ability to stack up to 4 units simplifies management in high port-density installations, and Power over Ethernet (PoE+) can supply power to Enterprise edge devices such as IP phones.
-
AT-XS916MXT: 16-port stackable 10 Gigabit switch, with 12 x 100/1000/10G Base-T, and 4 x SFP+ ports.
Availability: In stockOut of stock
The Allied Telesis XS916MXT features 12 x 100/1000/10GBASE-T, and 4 x SFP+ ports, in a cost-effective compact package.
10 Gigabit copper server and storage connectivity is well catered for, as 2 units can use VCStack™ to create a single 32-port virtual switch, which still fits in a standard single rack-unit space.
-
AT-x510L-28GP: 24-port 10/100/1000T PoE+ switch with 4x1G SFP uplink ports (software upgradeable to 10G SFP+ ports) and a single fixed PSU
Availability: In stockOut of stock
The high-value Allied Telesis AT-x510L-28GP Gigabit edge switch features 24 x 10/100/1000T PoE+ ports and 4 x 1G/10G SFP+ uplink ports with a single internal power supply.
The x510L Series with Power over Ethernet (PoE+) is ideal for connecting and powering today’s converged networks, where IP phones and digital surveillance cameras share the data network. Allied Telesis x510L-GP switches provide cost-effective powered solutions for modern enterprise businesses.
-
AT-AR3050S: 2 x GE WAN and 8 x 10/100/1000 LAN with Dual core 800Mhz CPU, 1Gb RAM, Required Net.Cover for software maintenance
Availability: In stockOut of stock
Application: NextGen FirewallWAN Uplink Media: FiberWAN Uplink Speed: 1 GbpsWAN Port Count: 2LAN Port Count: 8LAN Port Speed: 1 Gbps -
AT-SBx908-N1: Advanced Modular Switch with 8 x 60Gbps Expansion Bays (PSU not included)
Availability: In stockOut of stock
The Allied Telesis SwitchBlade x908 modular switch is the ideal solution for the modern enterprise network core where reliability, resiliency and high performance are the key requirements.
Đánh giá
Chưa có đánh giá nào.