JL322A: Aruba 2930M 48G PoE+ 1-slot Switch
44 Autosensing 10/100/1000 ports PoE+ and 4 Combo 10/100/1000BASE-T or 100/1000Mbps SFP Ports
CO: Made in Singapore
-
I/O PORTS AND SLOTS - 24G 1-slot Switch (JL319A):
- 20 Autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000Base-T)
- 24G PoE+ 1-slot Switch (JL320A):
- 20 Autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000Base-T, IEEE 802.3at PoE+)
- 48G 1-slot Switch (JL321A):
- 44 Autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000Base-T)
- 48G PoE+ 1-slot Switch (JL322A):
- 44 Autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000Base-T, IEEE 802.3at PoE+)
- All Switches (JL319A – JL322A):
- Duplex: 10BASE-T/100BASE-TX: half or full
- 1000BASE-T: full only
- 4 Combo 10/100/1000BASE-T or 100/1000 Mbps SFP Ports
ADDITIONAL PORTS AND SLOTS - 1 Dual Personality (RJ-45 or USB Micro-B) serial console port
- 1 USB B port for uploading/ downloading files
- 1 100BASE-T Out of Band Management Port
- 1 Uplink Slot
- 1 Stacking Module Slot
- 2 Power Supply Slots (power supplies not included)
- See datasheet for the list of modules and accessories
MEMORY AND PROCESSOR - Dual Core ARM Cortex A9 @ 1016 MHz
- 1 GB DDR3 SDRAM
- Packet Buffer Size: 12.38 MB 4.5 MB Ingress / 7.875 MB Egress
- 4GB eMMC
PHYSICAL CHARACTERISTICS - Dimensions:
- (H) 4.39 cm x (W) 44.25 cm x (D) 32.43 cm
(1.73″ x 17.42″ x 12.77″)
- (H) 4.39 cm x (W) 44.25 cm x (D) 32.43 cm
- Weight:
- 24G Switch (JL319A): 4.50 kg (9.81 lbs)
- 24G PoE+ Switch (JL320A): 4.45 kg (9.92 lbs)
- 48G Switch (JL321A): 4.60 kg (10.14 lbs)
- 48G PoE+ Switch (JL322A): 4.65 kg (10.25 lbs)
PERFORMANCE - 10 Mbps Latency: <98.5µs (FIFO 64 byte packets)
- 100 Mbps Latency: <11.8µs (FIFO 64-byte Packets)
- 1000 Mbps Latency: <3.1 µs (FIFO 64-byte packets)
- 10 Gbps Latency: <3.4µs (FIFO 64-byte packets)
- 1000 Mb Latency: <3.8 µs (64-byte packets)
- Routing table size: 2,000 IPv4, 1,000 IPv6 in hardware, 200 OSPF, 256 Static, 10,000 RIP
- MAC address table size: 32768 entries
- 24G/24G PoE+ Switch (JL319A, JL320A):
- Throughput: 95.2 Mpps
- Switching capacity: 128 Gbps
- Switching Capacity (including stacking): 228 Gbps
- 48G/48G PoE+ Switch (JL321A,JL322A):
- Throughput: up to 112 Mpps
- Switching capacity: 176 Gbps
- Switching Capacity (including stacking): 276 Gbps
ENVIRONMENTAL - Operating temperature:
- 32˚F to 131˚F (0˚C to 55˚C) up to 5000ft, 32˚F to 122˚F (0˚C to 50˚C)
- Derate -1˚C for every 1000 ft from 5000 ft to 10000 ft
- Operating Relative Humidity: 15% to 95%, (non-condensing) 10,000 ft
- Non-Operating/ Storage Temperature: -40˚C to +70˚C up to 15000 ft
- Non-Operating/ Storage Relative Humidity: 90% at 65˚C (non-condensing); 15,000 ft
- Acoustic: See data sheet
- Primary Airflow Direction: Port to power
- 24G 1-slot Switch (JL319A):
-
ELECTRICAL CHARACTERISTICS - Frequency: 50/60 Hz
- Voltage: See data sheet
- Maximum heat dissipation: See data sheet
- Current: See data sheet
- Maximum power rating: See data sheet
- Idle power: See data sheet
- Hibernate Power: 7W
- PoE Power (max possible):
- 720 W (24G PoE+ switch, JL320A)
- 1440 W (48G PoE+ switch, JL322A)
- Notes:
- Idle power is the actual power consumption of the device with no ports connected.
- Maximum power rating and maximum heat dissipation are the worst case theoretical maximum numbers provide for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
SAFETY - UL 60950-1, 2nd Edition
- EN 60950-1:2006 +A11:2009 : A1:2010 +A12:2011 +A2:2013
- IEC60950-1:2005 +A1:2009 +A2:2013
- CSA 22.2 No. 60950-1-07 2nd
- EN60825-1:2007 /IEC 60825-1:2007 Class 1
EMISSIONS - VCCI Class A
- CNS 13438
- ICES-003 Class A
- FCC CFR 47 Part 15, Class A
- EN 55022: 2010/CISPR-22, Class A
IMMUNITY - Generic: EN 55024:2010/CISPR 24
- ESD: IEC 61000-4-2
- Radiated: IEC 61000-4-3
- EFT/Burst: IEC 61000-4-4 Surge IEC 61000-4-5
- Conducted: IEC 61000-4-6
- Power frequency magnetic field: IEC 61000-4-8
- Voltage dips and interruptions: IEC 61000-4-11
- Harmonics: EN 61000-3-2, IEC 61000-3-2
- Flicker: EN 61000-3-3, IEC 61000-3-3
MANAGEMENT AND MONITORING - Aruba Central
- Aruba AirWave Network Management
- IMC—Intelligent Management Center
- Command-line interface
- Web browser
- Configuration menu
- SNMP manager
- Telnet
- RMON1
- FTP
- Out-of-band management (serial RS-232C, micro USB, Ethernet)
WARRANTY AND SUPPORT - Limited lifetime warrantySee www.hpe.com/networking/warrantysummary for warranty and support information included with your product purchase.
- Software releasesTo find software for your product, refer to www.hpe.com/networking/support; for details on the software releases available with your product purchase, refer to www.hpe.com/networking/warrantysummary.
Datasheet: download here
Related Products
- desktop-columns-3 tablet-columns-2 mobile-columns-2
-
AT-x510-52GTX: 48-port 10/100/1000T stackable switch with 4 SFP+ ports and 2 fixed power supplies.
Availability: In stockOut of stock
The Allied Telesis AT-x510-52GTX stackable Gigabit edge switch features 48 x 10/100/1000T ports and 4 x 10G/1G SFP+ uplink ports with two internal load-sharing AC power supplies for high reliability.
Combined with VCStack™ — which allows devices to be stacked to create highly resilient solutions that can be distributed over long-distances — the AT-x510-52GTX is the perfect choice for critical applications requiring uninterrupted service. The x510 Series also offers a comprehensive security feature set that enables secure Edge solutions for enterprise, healthcare, education and government applications.
-
AT-x510L-52GP: 48-port 10/100/1000T PoE+ switch with 4x1G SFP uplink ports (software upgradeable to 10G SFP+ ports) and a single fixed PSU.
Availability: In stockOut of stock
The high-value Allied Telesis x510L-52GP Gigabit edge switch features 48 x 10/100/1000T PoE+ ports and 4 x 1G/10G SFP+ uplink ports with a single internal power supply.
The x510L Series with Power over Ethernet (PoE+) is ideal for connecting and powering today’s converged networks, where IP phones and digital surveillance cameras share the data network. Allied Telesis x510L-GP switches provide cost-effective powered solutions for modern enterprise businesses.
-
AT-x510-28GSX: 24 x 100/1000X fiber access ports and 4 x 1G/10G SFP+ uplink ports
Availability: In stockOut of stock
Stackable Gigabit SwitchThe Allied Telesis x510-28GSX stackable Gigabit edge switch provides an advanced feature set for fiber networks, with 24 x 100/1000X fiber access ports and 4 x 1G/10G SFP+ uplink ports.
Two internal power supplies provide high reliability, and the power of VCStack™ allows multiple units to create a single virtual device for a highly resilient solution that can be distributed over long distances. The x510-28GSX is ideal for Network Service Providers, supporting fiber access solutions for FTTB (Fiber To The Building) or FTTH (Fiber To The Home), and is equally well-suited to enterprise customers who require total data security, or industrial applications, where the noise immunity of fiber connectivity provides a reliable network infrastructure.
-
AT-SBx908-N1: Advanced Modular Switch with 8 x 60Gbps Expansion Bays (PSU not included)
Availability: In stockOut of stock
The Allied Telesis SwitchBlade x908 modular switch is the ideal solution for the modern enterprise network core where reliability, resiliency and high performance are the key requirements.
-
AT-AR4050S – 2 x GE WAN and 8 x 10/100/1000 LAN with Quad core 1.5Ghz CPU, 2Gb RAM, Required Net.Cover for software maintenance.
Availability: In stockOut of stock
Application: NextGen FirewallWAN Uplink Media: FiberWAN Uplink Speed: 1 GbpsWAN Port Count: 2LAN Port Count: 8LAN Port Speed: 1 Gbps -
AT-x510L-28GP: 24-port 10/100/1000T PoE+ switch with 4x1G SFP uplink ports (software upgradeable to 10G SFP+ ports) and a single fixed PSU
Availability: In stockOut of stock
The high-value Allied Telesis AT-x510L-28GP Gigabit edge switch features 24 x 10/100/1000T PoE+ ports and 4 x 1G/10G SFP+ uplink ports with a single internal power supply.
The x510L Series with Power over Ethernet (PoE+) is ideal for connecting and powering today’s converged networks, where IP phones and digital surveillance cameras share the data network. Allied Telesis x510L-GP switches provide cost-effective powered solutions for modern enterprise businesses.
-
AT-x310-26FP: 24-port 10/100BASE-T PoE+ switch with 2 combo ports (100/1000X SFP or 10/100/1000T) and 2 stacking ports.
Availability: In stockOut of stock
The Allied Telesis AT-x310-26FP features 24 Fast Ethernet ports with 2 Gigabit uplinks and 2 stacking ports. Power over Ethernet Plus (PoE+) provides up to 30 watts to support high power connected devices such as multi-band wireless access points and Pan, Tilt, and Zoom digital security cameras.
-
AT-x310-50FP: 48-port 10/100BASE-T PoE+ switch with 2 combo ports (100/1000X SFP or 10/100/1000T) and 2 stacking ports.
Availability: In stockOut of stock
The Allied Telesis AT-x310-50FP features 48 Fast Ethernet ports with 2 Gigabit uplinks and 2 stacking ports.
The ability to stack up to 4 units simplifies management in high port-density installations, and Power over Ethernet (PoE+) can supply power to Enterprise edge devices such as IP phones.
-
AT-x930-28GSTX: 24-port 10/100/1000T and 100/1000 SFP stackable switch with 4 SFP+ ports and dual hotswap PSU bays, Required Net.Cover for software maintenance.
Availability: In stockOut of stock
The Allied Telesis x930-28GSTX features 24 Gigabit combo ports with 4 10 Gigabit uplinks, providing the ability to mix copper and fiber connectivity for fully flexible deployment. Long-distance stacking of up to 8 units supports distributed environments, and Allied Telesis Management Framework (AMF) and Wireless Manager provide unified network management for your entire wired and wireless infrastructure.
Đánh giá
Chưa có đánh giá nào.