-
I/O PORTS AND SLOTS - 24G 1-slot Switch (JL319A):
- 20 Autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000Base-T)
- 24G PoE+ 1-slot Switch (JL320A):
- 20 Autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000Base-T, IEEE 802.3at PoE+)
- 48G 1-slot Switch (JL321A):
- 44 Autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000Base-T)
- 48G PoE+ 1-slot Switch (JL322A):
- 44 Autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000Base-T, IEEE 802.3at PoE+)
- All Switches (JL319A – JL322A):
- Duplex: 10BASE-T/100BASE-TX: half or full
- 1000BASE-T: full only
- 4 Combo 10/100/1000BASE-T or 100/1000 Mbps SFP Ports
ADDITIONAL PORTS AND SLOTS - 1 Dual Personality (RJ-45 or USB Micro-B) serial console port
- 1 USB B port for uploading/ downloading files
- 1 100BASE-T Out of Band Management Port
- 1 Uplink Slot
- 1 Stacking Module Slot
- 2 Power Supply Slots (power supplies not included)
- See datasheet for the list of modules and accessories
MEMORY AND PROCESSOR - Dual Core ARM Cortex A9 @ 1016 MHz
- 1 GB DDR3 SDRAM
- Packet Buffer Size: 12.38 MB 4.5 MB Ingress / 7.875 MB Egress
- 4GB eMMC
PHYSICAL CHARACTERISTICS - Dimensions:
- (H) 4.39 cm x (W) 44.25 cm x (D) 32.43 cm
(1.73″ x 17.42″ x 12.77″)
- (H) 4.39 cm x (W) 44.25 cm x (D) 32.43 cm
- Weight:
- 24G Switch (JL319A): 4.50 kg (9.81 lbs)
- 24G PoE+ Switch (JL320A): 4.45 kg (9.92 lbs)
- 48G Switch (JL321A): 4.60 kg (10.14 lbs)
- 48G PoE+ Switch (JL322A): 4.65 kg (10.25 lbs)
PERFORMANCE - 10 Mbps Latency: <98.5µs (FIFO 64 byte packets)
- 100 Mbps Latency: <11.8µs (FIFO 64-byte Packets)
- 1000 Mbps Latency: <3.1 µs (FIFO 64-byte packets)
- 10 Gbps Latency: <3.4µs (FIFO 64-byte packets)
- 1000 Mb Latency: <3.8 µs (64-byte packets)
- Routing table size: 2,000 IPv4, 1,000 IPv6 in hardware, 200 OSPF, 256 Static, 10,000 RIP
- MAC address table size: 32768 entries
- 24G/24G PoE+ Switch (JL319A, JL320A):
- Throughput: 95.2 Mpps
- Switching capacity: 128 Gbps
- Switching Capacity (including stacking): 228 Gbps
- 48G/48G PoE+ Switch (JL321A,JL322A):
- Throughput: up to 112 Mpps
- Switching capacity: 176 Gbps
- Switching Capacity (including stacking): 276 Gbps
ENVIRONMENTAL - Operating temperature:
- 32˚F to 131˚F (0˚C to 55˚C) up to 5000ft, 32˚F to 122˚F (0˚C to 50˚C)
- Derate -1˚C for every 1000 ft from 5000 ft to 10000 ft
- Operating Relative Humidity: 15% to 95%, (non-condensing) 10,000 ft
- Non-Operating/ Storage Temperature: -40˚C to +70˚C up to 15000 ft
- Non-Operating/ Storage Relative Humidity: 90% at 65˚C (non-condensing); 15,000 ft
- Acoustic: See data sheet
- Primary Airflow Direction: Port to power
- 24G 1-slot Switch (JL319A):
-
ELECTRICAL CHARACTERISTICS - Frequency: 50/60 Hz
- Voltage: See data sheet
- Maximum heat dissipation: See data sheet
- Current: See data sheet
- Maximum power rating: See data sheet
- Idle power: See data sheet
- Hibernate Power: 7W
- PoE Power (max possible):
- 720 W (24G PoE+ switch, JL320A)
- 1440 W (48G PoE+ switch, JL322A)
- Notes:
- Idle power is the actual power consumption of the device with no ports connected.
- Maximum power rating and maximum heat dissipation are the worst case theoretical maximum numbers provide for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
SAFETY - UL 60950-1, 2nd Edition
- EN 60950-1:2006 +A11:2009 : A1:2010 +A12:2011 +A2:2013
- IEC60950-1:2005 +A1:2009 +A2:2013
- CSA 22.2 No. 60950-1-07 2nd
- EN60825-1:2007 /IEC 60825-1:2007 Class 1
EMISSIONS - VCCI Class A
- CNS 13438
- ICES-003 Class A
- FCC CFR 47 Part 15, Class A
- EN 55022: 2010/CISPR-22, Class A
IMMUNITY - Generic: EN 55024:2010/CISPR 24
- ESD: IEC 61000-4-2
- Radiated: IEC 61000-4-3
- EFT/Burst: IEC 61000-4-4 Surge IEC 61000-4-5
- Conducted: IEC 61000-4-6
- Power frequency magnetic field: IEC 61000-4-8
- Voltage dips and interruptions: IEC 61000-4-11
- Harmonics: EN 61000-3-2, IEC 61000-3-2
- Flicker: EN 61000-3-3, IEC 61000-3-3
MANAGEMENT AND MONITORING - Aruba Central
- Aruba AirWave Network Management
- IMC—Intelligent Management Center
- Command-line interface
- Web browser
- Configuration menu
- SNMP manager
- Telnet
- RMON1
- FTP
- Out-of-band management (serial RS-232C, micro USB, Ethernet)
WARRANTY AND SUPPORT - Limited lifetime warrantySee www.hpe.com/networking/warrantysummary for warranty and support information included with your product purchase.
- Software releasesTo find software for your product, refer to www.hpe.com/networking/support; for details on the software releases available with your product purchase, refer to www.hpe.com/networking/warrantysummary.
Datasheet: download here
JL321A: Aruba 2930M 48G 1-slot Switch
44 Autosensing 10/100/1000 ports + 4 Combo 10/100/1000BASE-T or 100/1000Mbps SFP Ports
CO: Made in Singapore
Website này sử dụng Akismet để hạn chế spam. Tìm hiểu bình luận của bạn được duyệt như thế nào.
Related Products
- desktop-columns-3 tablet-columns-2 mobile-columns-2
-
AT-x510L-28GP: 24-port 10/100/1000T PoE+ switch with 4x1G SFP uplink ports (software upgradeable to 10G SFP+ ports) and a single fixed PSU
Availability: In stockOut of stock
The high-value Allied Telesis AT-x510L-28GP Gigabit edge switch features 24 x 10/100/1000T PoE+ ports and 4 x 1G/10G SFP+ uplink ports with a single internal power supply.
The x510L Series with Power over Ethernet (PoE+) is ideal for connecting and powering today’s converged networks, where IP phones and digital surveillance cameras share the data network. Allied Telesis x510L-GP switches provide cost-effective powered solutions for modern enterprise businesses.
-
AT-x510-28GSX: 24 x 100/1000X fiber access ports and 4 x 1G/10G SFP+ uplink ports
Availability: In stockOut of stock
Stackable Gigabit SwitchThe Allied Telesis x510-28GSX stackable Gigabit edge switch provides an advanced feature set for fiber networks, with 24 x 100/1000X fiber access ports and 4 x 1G/10G SFP+ uplink ports.
Two internal power supplies provide high reliability, and the power of VCStack™ allows multiple units to create a single virtual device for a highly resilient solution that can be distributed over long distances. The x510-28GSX is ideal for Network Service Providers, supporting fiber access solutions for FTTB (Fiber To The Building) or FTTH (Fiber To The Home), and is equally well-suited to enterprise customers who require total data security, or industrial applications, where the noise immunity of fiber connectivity provides a reliable network infrastructure.
-
AT-x510L-52GT: 48-port 10/100/1000T switch with 4x1G SFP uplink ports (software upgradeable to 10G SFP+ ports) and a single fixed PSU
Availability: In stockOut of stock
The high-value Allied Telesis AT-x510L-52GT Gigabit edge switch features 48 x 10/100/1000T ports and 4 x 1G/10G SFP+ uplink ports with a single internal power supply.
The x510L Series offers cost-effective edge connectivity for healthcare, education, and government applications. Comprehensive security and access features protect online resources, while the ability to upgrade the uplink speed and feature-set ensure a future-proof solution.
-
AT-x510-28GPX: 24-port 10/100/1000T PoE+ stackable switch with 4 SFP+ ports and 2 fixed power supplies. Required Net.Cover for software maintenance for firmware v5.4.4 or later
Availability: In stockOut of stock
Allied Telesis x510 GPX Series stackable Gigabit switches power the edge in the network more efficiently than any others.
The AT-x510-28GPX features 24 x 10/100/1000T PoE+ ports and 4 x 10G/1G SFP+ uplink ports. It includes two internal power supplies for high reliability, as well as VCStack™, allowing devices to be stacked to create highly resilient solutions that can be distributed over long distances. The AT-x510-28GPX delivers up to 30 Watts per port (PoE+), perfect for supporting standard as well as Pan/Tilt/Zoom video surveillance and security cameras, wireless access points, IP phones, RFID readers, automatic doors and other PoE-powered devices. This PoE option eliminates the need for power rewiring and minimizes the clutter of power supplies and adapters in awkward places. The AT-x510-28GPX is designed for the edge of enterprises, retail, government, universities and medical campuses.
-
AT-SBx3112: 12 Slot chassis including AT-SBx31FAN, no power supplies.
Availability: In stockOut of stock
The Allied Telesis SwitchBlade x3112 is a 12-slot access edge chassis switch primarily targeted for service provider fiber access networks, and equally at home at the enterprise network edge and the data center. The switch was designed to deliver high availability, maximum performance with wirespeed non-blocking backplane performance, and high port count.
-
AT-SBx8112: 12 Slot chassis including AT-SBx81FAN12, no power supplies.
Availability: In stockOut of stock
12-Slot Chassis
The AT-SBx8112 7RU advanced Layer 3+ chassis features 12 slots and an included fan module.
- Total slots: 12
- Control Fabric Card (CFC) Slots: 2
- Line Card Slots: 10
Two system and two PoE power supplies and a fan tray, along with the cards, are all hot-swappable.
-
AT-DC2552XS/L3: 48-port SFP+ slot, 4-port QSFP slot, 1-port console port, 1-port management port, 2 slots for PWR, 2 slots for FAN. (PSU/FAN is not included: need to purchase PSU and FAN separately) [Maximum 2 PSU and 2 FAN / Minimum 1 PSU and 2 FAN].
Availability: In stockOut of stock
10 Gigabit Layer 3 Stackable SwitchFor a smarter enterprise data center, connect servers and storage facilities with a high-speed, low latency network fabric that is faster, greener and easy to manage.
Overview
- Provides high-density 10GbE connectivity in a resilient, stackable package
- Can accommodate a 1+1 resilient power supply
- Delivers 1280Gbps of switching fabric with ultra low sub-μsec latency
- Utilizes back to front airflow
- SDN ready and able to support OpenFlow v1.3
-
AT-XS916MXS: 16-port stackable 10 Gigabit switch, with 12 x SFP+, and 4 x 100/1000/10G Base-T ports.
Availability: In stockOut of stock
The Allied Telesis XS916MXS features 12 x SFP+, and 4 x 100/1000/10GBASE-T ports, in a cost-effective compact package.
Enterprise networks can benefit from 10 Gigabit aggregation of edge switches, as well as automated network management and zero-touch recovery with the Allied Telesis Management Framework (AMF). The AT-XS916MXS offers a scalable 10 Gigabit solution to meet the increasing traffic demands of today’s online services and applications.
-
AT-x930-52GPX: 48-port 10/100/1000T PoE+ stackable switch with 4 SFP+ ports and dual hotswap PSU bays, Required Net.Cover for software maintenance.
Availability: In stockOut of stock
The Allied Telesis x930-52GPX features 48 Gigabit ports with 4 10 Gigabit uplinks, and dual hot-swap power supplies for a fully resilient solution. Long-distance stacking of up to 8 units supports distributed environments, and Power over Ethernet provides the full 30 watts of PoE+ on all ports supporting today’s high-power devices
Đánh giá
Chưa có đánh giá nào.